 | ETERNUS DX80 FC 4Gbps
Storage Area Network (SAN) Device Fujitsu | 19 Oct 2009
130491 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 10 for x86 Service Pack 2 for SUSE® SLES 10 |
Product Description
With three different base models, ETERNUS DX80 entry level disk storage systems can either connect to hosts via Fibre Channel (with 8 Gbit/s performance option), iSCSI or SAS. They are easy to install, configure, operate and maintain, integrating well with host operating systems, servers, network infrastructures and backup solutions. Different drive types can be mixed and matched, secured by the relevant monitored RAID levels (0, 1, 1+0, 5, 5+0 and 6) and features to ensure data integrity. Administrators can dynamically move data, spin disks down to save energy or encrypt data to prevent unauthorized access. In the event of power outages, the content of the cache is secured to flash memory. A backup copy is always at hand via snapshots and clones. For more information refer to http://ts.fujitsu.com/products/storage/index.html
Primary Driver File(s):
| File Name: lpfc.ko | File Version: 0:8.2.0.22 | |||||
| File Date: 06-May-2008 | File Size: 342308 | |||||
| Checksum: d10d81ebc4cb7984b9af928dc783ec58 | ||||||
| File URL: | ||||||
Driver Support File(s)
Storage Area Network
| Product Name | ETERNUS DX80 FC 4Gbps |
| Interface: | FibreChannel |
| Firmware: | V10L11 |
| Capacity: | 120 TB |
Tested Configuration:
| Switching System: | Brocade Communication Systems, Inc. Silkworm 200E |
| Host Bus Adapter: | Emulex Corporation LPe12002 , Interface: FibreChannel |
| System: | Fujitsu PRIMERGY® RX300 S4 |
| Test Kit: | DiskKit 5.01.29 - 2009-04-01 |
Config Notes
|
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
Fujitsu
Fujitsu Technology Solutions GmbH
FTS TSP ST
Heinz-Nixdorf-Ring 1
Paderborn 33106
GERMANY