ETERNUS DX80 SAS

ETERNUS DX80 SAS
Storage Area Network (SAN) Device
Fujitsu

03 Mar 2010
131398

SUSE YES Certified for the following products:
Operating Systems:

SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 Service Pack 3 for SUSE® SLES 10

Product Description
With three different base models, ETERNUS DX80 entry level disk storage systems can either connect to hosts via Fibre Channel (with 8 Gbit/s performance option), iSCSI or SAS. They are easy to install, configure, operate and maintain, integrating well with host operating systems, servers, network infrastructures and backup solutions. Different drive types can be mixed and matched, secured by the relevant monitored RAID levels (0, 1, 1+0, 5, 5+0 and 6) and features to ensure data integrity. Administrators can dynamically move data, spin disks down to save energy or encrypt data to prevent unauthorized access. In the event of power outages, the content of the cache is secured to flash memory. A backup copy is always at hand via snapshots and clones. For more information refer to http://ts.fujitsu.com/products/storage/index.html

Primary Driver File(s):


	File Name: mptsas.ko			File Version: -1
	File Date: 05-Sep-2009			File Size: 88496
	Checksum: 6008f1ab475edc8ffc35a67a6d71c096
	File URL:
	File Name: mptbase.ko			File Version: 3.04.07_suse
	File Date: 05-Sep-2009			File Size: 145592
	Checksum: def1b9666227c5aea3d7bb36af3b4450
	File URL:
	File Name: scsi_transport_sas.ko			File Version: 3.04.07_suse
	File Date: 05-Sep-2009			File Size: 65600
	Checksum: c9e317fdd2a732154fdc4a35a8cc296f
	File URL:
	File Name: mptscsih.ko			File Version: 3.04.07_suse
	File Date: 05-Sep-2009			File Size: 67664
	Checksum: 2ab81b305f68b0a1a9ca5e5855f4cea4
	File URL:

Driver Support File(s)

Storage Area Network

Product Name	ETERNUS DX80 SAS
Interface:	Serial SCSI (SAS)
Firmware:	V10L31
Capacity:	120 TB

Tested Configuration:

Host Bus Adapter:	2 LSI Logic LSI SAS3442E-R , Interface: Serial SCSI (SAS)
System:	Fujitsu PRIMERGY® RX300 S4
Test Kit:	DiskKit 5.01.37 - 2009-10-28

Config Notes

The system has successfully proven compatibility with the native MPIO solution of SUSE® LINUX Enterprise Server 10 for AMD64® & Intel® EM64T®

The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:

Fujitsu
Fujitsu Technology Solutions GmbH
FTS TSP ST
Heinz-Nixdorf-Ring 1
Paderborn 33106
GERMANY

537314

ETERNUS DX80 SAS - Yes Bulletin 131398 | SUSE