|
| PRIMERGY® TX150 S7
Network Server
Fujitsu | 04 May 2010
131885 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Desktop 11 for AMD64 & Intel64
Service Pack 1 for SUSE® SLED 11 |
Product Description
The PRIMERGY TX150 S7: the right system for SMEs or non-mission-critical decentralized infrastructures where the main focus is on expandability and availability. The expandability and availability come from the 6 expansion slots (5 of which PCIe Gen 2) and up to 8x 2.5 hot-plug hard disks. Increase the systems availability and energy efficiency through the use of optional redundant power supplies boasting up to 89% energy efficiency. The TX150 S7 also offers up to the latest generation Intel® Xeon® processor X3470 single processor platform, delivering energy-efficient performance at an attractive price. The PRIMERGY TX150 S7: the one processor tower server maximized! For more detailed information please refer to the data sheet at: http://docs.ts.fujitsu.com/dl.aspx?id=fafe25d5-bf73-498e-82de-d8946de96d66
Tested Configuration:
Computer Type: | Tower |
Mother Board Revision: | D2759 |
BIOS/uEFI: | 6.0.0 Rev. 1.05.2759.A1 |
CPU: | Intel
Core™ i7-2600 Processor 3.40 GHz |
RAM: | 8 GB |
Ports and Bus Types: | 2 PCI Express X1 PCI Express X4 2 PCI Express X8 32-bit/33MHz PCI 10 USB Ports Serial |
Video Adapter: | ATI
FirePro™ V4800 |
Host Bus Adapter: | Intel
Cougar Point 6 port SATA AHCI Controller
, Serial ATA (SATA) |
Hard Disk Drive: | Western Digital
Caviar Blue WD5000AAKS
, Serial ATA (SATA) |
CD/DVD: | Hitachi Data Systems
BD-RE BH20N
, Serial ATA (SATA) |
Test Kit: | System Certification Kit 6.5.0-0.30 |
Config Notes
- Graphics: The listed graphics driver is PLDP compliant and delivered in KMP format. Please add http://www2.ati.com/suse/sle11sp1/ to your installation sources and install the driver provided there.
- Network: The listed LAN driver (e1000e.ko) is delivered through PLDP and in KMP format. It can be downloaded at: http://drivers.suse.com/fujitsu/Fujitsu-Clients/sle11-sp1/install-readme.html
- Kernel: Update kernel 2.6.32.36-0.5 was used to enable sound recording.
- Sound: Sound recording is only possible with devices connected to the rear panel.
|
Referenced Bulletins
135943
Adapters and Drivers
| | | | | |
ATI
FirePro™ V4800 |
| Driver Type: Video Driver | Driver Name: fglrx_drv.so |
| Driver Date: 20-Jul-2011 | Driver Size: 12503030 |
| Checksum: 187166be4952ef3778d695deb8dadd99 |
|
Intel
82579LM Gigabit Ethernet PHY (single port) |
| Driver Type: LAN Driver | Driver Name: e1000e.ko |
| Driver Date: 10-Dec-2010 | Driver Size: 364560 |
| Checksum: 4e523fc172351c5eba6cb1ebf747b82b |
|
Intel
Cougar Point 6 port SATA AHCI Controller |
| Driver Type: HBA Driver | Driver Name: ahci.ko |
| Driver Date: 14-Apr-2011 | Driver Size: 80352 |
| Checksum: 945475652d7e8d9988a5432085902892 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Fujitsu
Fujitsu Technology Solutions GmbH
TSP CLI E SW OSE
Bürgermeister-Ulrich-Strasse 100
Augsburg
86199
GERMANY
Voice: +49 (0)821 804-3321
|