|
 | BladeCenter HS12 (8028-46x)
Network Server
Fujitsu | 26 Aug 2010
133478 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 Service Pack 2 for SUSE® SLES 10 |
Virtual Machines (Guests OS):
SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 |
|
SP:
Service Pack 1 for SLES 11 |
Arch:
64 |
Mode:
Fully Virtualized |
SUSE® Linux Enterprise Server 11 for x86 |
|
SP:
Service Pack 1 for SLES 11 |
Arch:
32 |
Mode:
Paravirtualized |
Windows Server 2008 |
|
SP:
Service Pack 2 for Windows Server 2008 |
Arch:
32 |
Mode:
Fully Virtualized |
Product Description
The HS12 combines power and easy integration to offer a flexible, low-cost option for small businesses, a wide choice of processors, and the same availability features found on dual-processor serversso organizations can run their IT without investing in a data center.
Tested Configuration:
Computer Type: | Blade Module |
Mother Board Revision: | 3 |
BIOS/uEFI: | N1E143AUS-1.08 |
CPU: | Intel
Xeon® Processor X3363 2.83 GHz |
RAM: | 12 GB |
Ports and Bus Types: | PCI Express X1 |
Video Adapter: | Matrox®
MGA G200 VE |
Host Bus Adapter: | LSI Logic
SAS1064E PCI-Express Fusion-MPT
, Serial SCSI (SAS) |
Hard Disk Drive: | 2 IBM
73 GB 10k 2.5 Hot-Swap SAS HDD
, Serial SCSI (SAS) |
Test Kit: | System Certification Kit 6.6.0-34.1 |
Config Notes
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration. Hard Disk Configuration: RAID 0.
- Xen Hypervisor: the hypervisor was booted with following additional parameters: dom0_mem=5G dom0_max_vcpus=5.
- PCI Network Pass-Through: System was tested using PCI pass-through where one of the host network adapters was given to the SLES 12 FV guests. One of the embedded IBM Dual-Port 10GB Virtual Fabric Ethernet LOM adapters was used in this testing.
- VM Driver Pack: All FV guests were tested with PV drivers installed. The SLES 11 SP3 and SLES 12 drivers are included with the OS. The Windows 2012 R2 drivers are available from http://download.suse.com (VMDP-WIN-2.1.exe).
- Serial/USB/VGA port(s): provided through KVM connector console breakout cable which supplies one RS232 serial port, one VGA port and two USB ports. The system also has one internal USB port.
|
Adapters and Drivers
| | | | | |
Matrox®
MGA G200 VE |
| Driver Type: Video Driver | Driver Name: radeon_drv.so |
| Driver Date: 29-Mar-2010 | Driver Size: 720064 |
| Checksum: 392237aeb0878c4fe6de3c5728a9c319 |
|
2 Broadcom®
Broadcom NetExtreme Gigabit Ethernet Adapter |
| Driver Type: LAN Driver | Driver Name: tg3.ko |
| Driver Date: 20-May-2010 | Driver Size: 196776 |
| Checksum: 95a2600742be897aff5bff041657a5c4 |
|
LSI Logic
SAS1064E PCI-Express Fusion-MPT |
| Driver Type: HBA Driver | Driver Name: mptsas.ko |
| Driver Date: 20-May-2010 | Driver Size: 104944 |
| Checksum: 9a01a228da26f94f3217b384892c5809 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Fujitsu
Fujitsu Technology Solutions GmbH
FTS TSP ST
Heinz-Nixdorf-Ring 1
Paderborn
33106
GERMANY
|