ETERNUS DX90 S2

File Name: lpfc.ko

File Version: -1

File Date: 18-Mar-2011

File Size: 773496

Checksum: e7b8256ff7b30ba497eb6a9411a0b1ed

ETERNUS DX90 S2
Storage Area Network (SAN) Device
Fujitsu

03 Aug 2011
135959

SUSE YES Certified for the following products:
Operating Systems:

SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 with XEN Service Pack 4 for SUSE® SLES 10

Product Description
ETERNUS DX90 S2 is an affordable disk storage system for small and midsize environments. ETERNUS DX90 S2 scales flexibly up to 240 disk drives. Different 2.5 inch, 3.5 inch, SAS, Nearline SAS, SSD drive types are supported even in mixed configurations, to enable efficient implementation of a tiered storage environment. Non-disruptive capacity upgrades are possible just by adding disks or complete enclosures. Data-in-place upgrades lead seamlessly to the next higher ETERNUS DX400 S2 series. Customers can choose from FC, FCoE, iSCSI, or SAS, host interfaces which can be flexibly changed during the lifecycle. The new FCoE 10Gbit/s interface enables future-proof infrastructure convergence. For simultaneous connection to different network types ETERNUS DX90 S2 can operate interfaces in a mixed configuration. Remote copy of ETERNUS DX90 S2 to a second storage device (ETERNUS DX90 S2 / DX400 S2 series / DX8000) protects valuable data assets against site outages. For more information please refer to: http://www.fujitsu.com/global/services/computing/storage/eternus/products/diskstorage/

Tested Configuration:

Host Bus Adapter:	Emulex Corporation LPe11002 Dual Channel PCI-e 4Gb/s Fibre Channel , FibreChannel
Test Kit:	DiskKit 5.01.37 - 2009-10-28

Product File Specifications

HBA Driver:

Config Notes

Kdump (SLE15): the crash kernel reserved memory parameters were increased from the default to crashkernel=291M,high crashkernel=172M,low using YaST.
Install: System installed using PXE network install; the OS was installed using the UEFI boot loader and system configuration. Disk configuration: two HDD configured as RAID 0 and M.2 boot device configured with two SSDs in RAID 0.
SR-IOV: System was tested using SR-IOV where a virtual network adapter was given to a SLES 15 guest. One of the Intel Ethernet Connection X722 for 10GBASE-T adapters was used in this testing.

Referenced Bulletins
147919

Adapters and Drivers


Emulex Corporation LPe11002 Dual Channel PCI-e 4Gb/s Fibre Channel

The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.

https://www.suse.com/product-certification/yes-certified/certification-requirements/

For more information regarding the specific test configuration, please contact:

Fujitsu
Fujitsu Technology Solutions GmbH
FTS PDG ST
Heinz-Nixdorf-Ring 1
Paderborn 33106
GERMANY

597260

ETERNUS DX90 S2 - Yes Bulletin 135959 | SUSE