 | ETERNUS DX90 S2
Storage Area Network (SAN) Device Fujitsu | 03 Aug 2011
135962 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 Service Pack 1 for SUSE® SLES 11 |
Product Description
ETERNUS DX90 S2 is an affordable disk storage system for small and midsize environments. ETERNUS DX90 S2 scales flexibly up to 240 disk drives. Different 2.5 inch, 3.5 inch, SAS, Nearline SAS, SSD drive types are supported even in mixed configurations, to enable efficient implementation of a tiered storage environment. Non-disruptive capacity upgrades are possible just by adding disks or complete enclosures. Data-in-place upgrades lead seamlessly to the next higher ETERNUS DX400 S2 series. Customers can choose from FC, FCoE, iSCSI, or SAS, host interfaces which can be flexibly changed during the lifecycle. The new FCoE 10Gbit/s interface enables future-proof infrastructure convergence. For simultaneous connection to different network types ETERNUS DX90 S2 can operate interfaces in a mixed configuration. Remote copy of ETERNUS DX90 S2 to a second storage device (ETERNUS DX90 S2 / DX400 S2 series / DX8000) protects valuable data assets against site outages. For more information please refer to: http://www.fujitsu.com/global/services/computing/storage/eternus/products/diskstorage/
Primary Driver File(s):
| File Name: lpfc.ko | File Version: -1 | |||||
| File Date: 20-May-2010 | File Size: 777360 | |||||
| Checksum: fe839bf44ba9a838b2f43b747ea6e389 | ||||||
| File URL: | ||||||
Driver Support File(s)
Storage Area Network
| Product Name | ETERNUS DX90 S2 |
| Interface: | FibreChannel |
| Firmware: | V10L11-0000 |
| Capacity: | 240 TB |
Tested Configuration:
| Switching System: | Brocade Communication Systems, Inc. Silkworm 200E |
| Host Bus Adapter: | Emulex Corporation LPe11002 Dual Channel PCI-e 4Gb/s Fibre Channel , Interface: FibreChannel |
| System: | Fujitsu PRIMERGY® RX300 S4 |
| Test Kit: | DiskKit 5.01.38 - 2010-07-20 |
Config Notes
|
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
Fujitsu
Fujitsu Technology Solutions GmbH
FTS PDG ST
Heinz-Nixdorf-Ring 1
Paderborn 33106
GERMANY