 | ETERNUS DX80 S2
Storage Area Network (SAN) Device Fujitsu | 04 Nov 2011
136338 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 10 for x86 Service Pack 4 for SUSE® SLES 10 |
Product Description
ETERNUS DX80 S2 is an affordable disk storage system for small and midsize environments. ETERNUS DX80 S2 scales flexibly up to 120 disk drives. Different 2.5 inch, 3.5 inch, SAS, Nearline SAS, SSD drive types are supported even in mixed configurations, to enable efficient implementation of a tiered storage environment. Non-disruptive capacity upgrades are possible just by adding disks or complete enclosures. Data-in-place upgrades lead seamlessly to the next higher ETERNUS DX400 S2 series. Customers can choose from FC, FCoE, iSCSI, or SAS, host interfaces which can be flexibly changed during the lifecycle. The new FCoE 10Gbit/s interface enables future-proof infrastructure convergence. For simultaneous connection to different network types ETERNUS DX80 S2 can operate interfaces in a mixed configuration. For more information please refer to: http://www.fujitsu.com/global/services/computing/storage/eternus/products/diskstorage/
Primary Driver File(s):
Driver Support File(s)
Storage Area Network
| Product Name | ETERNUS DX80 S2 |
| Interface: | iSCSI |
| Firmware: | V10L16-0000 |
| Capacity: | 240 TB |
Tested Configuration:
| Host Bus Adapter: | 2 Intel Pro/1000 PCI-E , Interface: iSCSI |
| System: | Fujitsu PRIMERGY® RX300 S4 |
| Test Kit: | DiskKit 5.01.38 - 2010-07-20 |
Config Notes
|
Referenced Bulletins
136332
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
Fujitsu
Fujitsu Technology Solutions GmbH
FTS PDG ST
Heinz-Nixdorf-Ring 1
Paderborn 33106
GERMANY