ETERNUS DX80 S2

ETERNUS DX80 S2
Storage Area Network (SAN) Device
Fujitsu

04 Nov 2011
136342

SUSE YES Certified for the following products:
Operating Systems:

SUSE® Linux Enterprise Server 11 for x86 Service Pack 1 for SUSE® SLES 11

Product Description
ETERNUS DX80 S2 is an affordable disk storage system for small and midsize environments. ETERNUS DX80 S2 scales flexibly up to 120 disk drives. Different 2.5 inch, 3.5 inch, SAS, Nearline SAS, SSD drive types are supported even in mixed configurations, to enable efficient implementation of a tiered storage environment. Non-disruptive capacity upgrades are possible just by adding disks or complete enclosures. Data-in-place upgrades lead seamlessly to the next higher ETERNUS DX400 S2 series. Customers can choose from FC, FCoE, iSCSI, or SAS, host interfaces which can be flexibly changed during the lifecycle. The new FCoE 10Gbit/s interface enables future-proof infrastructure convergence. For simultaneous connection to different network types ETERNUS DX80 S2 can operate interfaces in a mixed configuration. For more information please refer to: http://www.fujitsu.com/global/services/computing/storage/eternus/products/diskstorage/

Primary Driver File(s):


	File Name: libiscsi.ko			File Version: -1
	File Date: 20-May-2010			File Size: 61432
	Checksum: 4a62f2e42376038b301ee94a231e568d
	File URL:
	File Name: iscsi_tcp.ko			File Version: -1
	File Date: 20-May-2010			File Size: 21312
	Checksum: ca58c01b1c28dcab40e62965723062cf
	File URL:
	File Name: scsi_transport_iscsi.ko			File Version: 2.0-870
	File Date: 20-May-2010			File Size: 51912
	Checksum: 20e40dba8f023bade4990ccc6002edc2
	File URL:
	File Name: libiscsi_tcp.ko			File Version: -1
	File Date: 20-May-2010			File Size: 24720
	Checksum: 397ec270284593ae19a8bda07f0740c6
	File URL:

Driver Support File(s)

Storage Area Network

Product Name	ETERNUS DX80 S2
Interface:	iSCSI
Firmware:	V10L16-0000
Capacity:	240 TB

Tested Configuration:

Host Bus Adapter:	2 Intel Pro/1000 PCI-E , Interface: iSCSI
System:	Fujitsu PRIMERGY® RX300 S4
Test Kit:	DiskKit 5.01.38 - 2010-07-20

Config Notes

The system has successfully proven compatibility with the native MPIO solution of SUSE® LINUX Enterprise Server 11 for x86 with Service Pack 1 for SUSE® SLES 11.

Referenced Bulletins
136334

The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:

Fujitsu
Fujitsu Technology Solutions GmbH
FTS PDG ST
Heinz-Nixdorf-Ring 1
Paderborn 33106
GERMANY

550106

ETERNUS DX80 S2 - Yes Bulletin 136342 | SUSE