ETERNUS DX80 S2

ETERNUS DX80 S2
Storage Area Network (SAN) Device
Fujitsu

04 Nov 2011
136343

SUSE YES Certified for the following products:
Operating Systems:

SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 with XEN Service Pack 1 for SUSE® SLES 11

Product Description
ETERNUS DX80 S2 is an affordable disk storage system for small and midsize environments. ETERNUS DX80 S2 scales flexibly up to 120 disk drives. Different 2.5 inch, 3.5 inch, SAS, Nearline SAS, SSD drive types are supported even in mixed configurations, to enable efficient implementation of a tiered storage environment. Non-disruptive capacity upgrades are possible just by adding disks or complete enclosures. Data-in-place upgrades lead seamlessly to the next higher ETERNUS DX400 S2 series. Customers can choose from FC, FCoE, iSCSI, or SAS, host interfaces which can be flexibly changed during the lifecycle. The new FCoE 10Gbit/s interface enables future-proof infrastructure convergence. For simultaneous connection to different network types ETERNUS DX80 S2 can operate interfaces in a mixed configuration. For more information please refer to: http://www.fujitsu.com/global/services/computing/storage/eternus/products/diskstorage/

Primary Driver File(s):


	File Name: libiscsi.ko			File Version: -1
	File Date: 20-May-2010			File Size: 87848
	Checksum: 3c59fecdb22633079eff75ba05826bd4
	File URL:
	File Name: iscsi_tcp.ko			File Version: -1
	File Date: 20-May-2010			File Size: 28472
	Checksum: 4c7ecab6d9eca118c8f759ee3bba4933
	File URL:
	File Name: libiscsi_tcp.ko			File Version: -1
	File Date: 20-May-2010			File Size: 34376
	Checksum: 238d0379300fa18fd4f9ca2ec396c4b6
	File URL:
	File Name: scsi_transport_iscsi.ko			File Version: 2.0-870
	File Date: 20-May-2010			File Size: 75944
	Checksum: 16abd361976b8f3d66473b9e133cc983
	File URL:

Driver Support File(s)

Storage Area Network

Product Name	ETERNUS DX80 S2
Interface:	iSCSI
Firmware:	V10L16-0000
Capacity:	240 TB

Tested Configuration:

Host Bus Adapter:	2 Intel Pro/1000 PCI-E , Interface: iSCSI
System:	Fujitsu PRIMERGY® RX300 S4
Test Kit:	DiskKit 5.01.38 - 2010-07-20

Config Notes

The system has successfully proven compatibility with the native MPIO solution of SUSE® LINUX Enterprise Server 11 for AMD64 & Intel64 with XEN with Service Pack 1 for SUSE® SLES 11.

Referenced Bulletins
136335

The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:

Fujitsu
Fujitsu Technology Solutions GmbH
FTS PDG ST
Heinz-Nixdorf-Ring 1
Paderborn 33106
GERMANY

550108

ETERNUS DX80 S2 - Yes Bulletin 136343 | SUSE