 | PRIMERGY® BX924 S3
Network Server IBM | 17 May 2012
137634 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 Service Pack 3 for SUSE® SLES 11 |
Virtual Machines (Guests OS):
| SUSE® Linux Enterprise Server 11 for x86 | |||
| SP: Service Pack 2 for SLES 11 | Arch: 32pae | Mode: Paravirtualized | |
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 | |||
| SP: Service Pack 2 for SLES 11 | Arch: 64 | Mode: Fully Virtualized | |
| Windows Server 2008 | |||
| SP: Service Pack 2 for Windows Server 2008 | Arch: 32 | Mode: Fully Virtualized | |
Product Description
The Fujitsu PRIMERGY BX924 S3 is designed from the ground up to set a new standard for versatility and scalability in a dual-socket server blade. It offers scalable performance to meet highest requirements of extensive virtualization/ consolidation scenarios on the one hand, and demanding high performance computing applications on the other hand. Packed with advanced features, the PRIMERGY BX924 S3 allows doing more with a two-processor server than ever before. Two Intel® Xeon® E5-2650 processors, 24 high-speed memory modules for up to 768 GB capacity, flexible 10 Gbit/s Emulex® CNA components as well as additional slots for mezzanine cards clearly emphasizing the approach as the perfect high-end server blade. Although servers are being booted more and more via network, this system is enabled for local boot, too. This may optionally be realized with the use of solid state drives (SSD) or a hard disk drive. While virtualization allows consolidating your IT resources, it often leads to increased expenses of the server administration. Thus the PRIMERGY BX924 S3 delivers state-of-the-art management capabilities with the integrated Remote Management Controller (iRMC S3) which offers the next generation of remote management functionality. The result is the ability to make your work faster, no matter whether your server is located in the server-room next door or in another part of the world. For more detailed information, please refer to the data sheet at: http://docs.ts.fujitsu.com/dl.aspx?id=4f5c04d4-b7d3-4fc5-af8c-b65f845d2b52
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | D3143 |
| BIOS/uEFI: | R1.4.0 |
| CPU: | 2 Intel Xeon® Processor E5-2650 2.00 GHz |
| RAM: | 32 GB |
| Ports and Bus Types: | 5 USB Ports |
| Video Adapter: | Matrox® MGA G200e |
| Host Bus Adapter: | LSI Logic MegaRAID® SAS 9260-8i , Serial SCSI (SAS) |
| Hard Disk Drive: | 2 Seagate® ST200FM0002 , Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 7.1.0-33.2 |
Config Notes
|
Referenced Bulletins
139131
Adapters and Drivers
| Matrox® MGA G200e | |||||||||
| Driver Type: Video Driver | Driver Name: mga_drv.so | ||||||||
| Driver Date: 16-Feb-2011 | Driver Size: 173128 | ||||||||
| Checksum: 8ebfc17a3c242bbbf0e8881cb3c825c9 | |||||||||
|
|
|||||||||
| 2 Emulex Corporation OneConnect 10Gb Ethernet Adapter OCe11102-N (Dual Port) | |||||||||
| Driver Type: LAN Driver | Driver Name: be2net.ko | ||||||||
| Driver Date: 09-Mar-2012 | Driver Size: 114643 | ||||||||
| Checksum: 5ff9ba96f7f72ca0133ff03da9bd7e3d | |||||||||
|
|
|||||||||
| LSI Logic MegaRAID® SAS 9260-8i | |||||||||
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko | ||||||||
| Driver Date: 18-Mar-2011 | Driver Size: 119472 | ||||||||
| Checksum: 7ed0552718b84ed9cfdb5809356d5ec2 | |||||||||
|
|
|||||||||
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com