|
| IBM Power 710 Server Express (8231-E2B)
Network Server
IBM | 16 Jul 2012
137949 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 11 for IBM Power™ Service Pack 2 for SUSE® SLES 11 |
Product Description
IBM Power 710 Server Express (8231-E2B)
Tested Configuration:
Computer Type: | Rack Mount |
Mother Board Revision: | 1 |
BIOS/uEFI: | 1 |
CPU: | 8 IBM
POWER7™ 3.0 GHz |
RAM: | 16 GB |
Ports and Bus Types: | 3 USB Ports 4 64-bit/133MHz PCI-X |
Host Bus Adapter: | IBM
PCI-X DDR 3Gb SAS Adapter (572A/572C)
, Serial SCSI (SAS) |
Hard Disk Drive: | 3 Seagate®
ST9146802SS
, Serial SCSI (SAS) Fujitsu
MBC2073RC
, Serial SCSI (SAS) |
Test Kit: | System Certification Kit 7.1.0-33.2 |
Config Notes
- Install: The Novell® SUSE® LINUX Enterprise Server install was performed using a network install method.
- Headless configuration - no graphics adapter. System configured using IBM remote Hardware Management Console (HMC) for graphics, keyboard and mouse.
|
Adapters and Drivers
| | | | | |
Intel
PRO/1000 PM (82571EB) Dual-Port Gigabit Ethernet Controller |
| Driver Type: LAN Driver | Driver Name: e1000e.ko |
| Driver Date: 15-Feb-2012 | Driver Size: 487008 |
| Checksum: 6b11eba6b08821d3b964df4ed15812e9 |
|
IBM
PCI-X DDR 3Gb SAS Adapter (572A/572C) |
| Driver Type: HBA Driver | Driver Name: ipr.ko |
| Driver Date: 15-Feb-2012 | Driver Size: 197072 |
| Checksum: 1a807fcf1410d36437e45fd8a0e06c08 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|