|
| Flex System x240 Compute Node (8737-R2x)
Network Server
Hewlett Packard Enterprise | 18 Mar 2013
138996 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 with KVM Service Pack 4 for SUSE® SLES 11 |
Virtual Machines (Guests OS):
SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 |
|
SP:
Service Pack 2 for SLES 11 |
Arch:
64 |
Mode:
Fully Virtualized |
SUSE® Linux Enterprise Server 11 for x86 |
|
SP:
Service Pack 2 for SLES 11 |
Arch:
32 |
Mode:
Paravirtualized |
SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 |
|
SP:
Service Pack 4 for SLES 10 |
Arch:
64 |
Mode:
Paravirtualized |
SUSE® LINUX Enterprise Server 10 for x86 |
|
SP:
Service Pack 4 for SLES 10 |
Arch:
32pae |
Mode:
Fully Virtualized |
Windows Server 2008 |
|
SP:
Service Pack 2 for Windows Server 2008 |
Arch:
32 |
Mode:
Fully Virtualized |
Product Description
A building block for the PureFlex System family, the IBM Flex System™ x240 Compute Node is an Intel-processor based server optimized for virtualization, performance and highly scalable I/O designed to run a wide variety of workloads in your PureFlex System.
Tested Configuration:
Computer Type: | Blade Module |
Mother Board Revision: | 1 |
BIOS/uEFI: | B2E111QUS-1.00 |
CPU: | 2 Intel
Xeon® Processor E5-2690 2.90 GHz |
RAM: | 98 GB |
Ports and Bus Types: | 2 PCI Express X16 USB Ports |
Video Adapter: | Matrox®
MGA G200eR |
Host Bus Adapter: | LSI Logic
SAS2004 PCI-Express Fusion-MPT
, Serial SCSI (SAS) |
Hard Disk Drive: | 2 IBM
300 GB 10K 6 Gbps SAS 2.5-inch SFF HS HDD
, Serial SCSI (SAS) |
Test Kit: | System Certification Kit 7.1.0-33.2 |
Config Notes
- Kdump (SLES12SP3): the crash kernel reserved memory parameters were increased from the default to crashkernel=512M,high crashkernel=128M,low using YaST.
- An updated SUSE kernel and Broadcom Emulex lpfc driver was used during testing and is SUSE SolidDriver Program compliant. The kernel and driver was installed from the following Installation Kit: lightpulse_adapters_lpfc-sle12sp3-x86_64-4.0.iso. This driver package can be downloaded and installed during the SLES install. To obtain the kernel and driver installation information go to: https://drivers.suse.com/emulex/LightPulse_Adapters_lpfc/sle-12-sp3-x86_64/4.0/install-readme.html
- SR-IOV/PCI Pass-through: Current system configuration does not support network SR-IOV or network PCI pass-through.
|
Referenced Bulletins
147542
Adapters and Drivers
| | | | | |
Matrox®
MGA G200eR |
| Driver Type: Video Driver | Driver Name: mga_drv.so |
| Driver Date: 04-Feb-2012 | Driver Size: 190688 |
| Checksum: 9ec99a5b6850be782df01c0b7663d67f |
|
Emulex Corporation
OneConnect 10Gb Ethernet Adapter OCe11102-N (Dual Port) |
| Driver Type: LAN Driver | Driver Name: be2net.ko |
| Driver Date: 15-Feb-2012 | Driver Size: 113352 |
| Checksum: 7a4b5451e96a9d05150a062f759e6083 |
|
LSI Logic
SAS2004 PCI-Express Fusion-MPT |
| Driver Type: HBA Driver | Driver Name: mpt2sas.ko |
| Driver Date: 15-Feb-2012 | Driver Size: 253048 |
| Checksum: 4a7cf02da81e903522d10faa86f90da3 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Hewlett Packard Enterprise
1701 E Mossy Oaks Rd
Spring
, TX
77389
|