 | BEETLE/M II plus G41
Workstation Wincor Nixdorf International GmbH | 18 Jun 2013
139098 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Desktop 11 for x86 Service Pack 2 for SUSE® SLED 11 |
Other Products:
| SUSE® LINUX Enterprise Point of Service (SLEPOS) |
Product Description
BEETLE Box for POS with enhanced serial ports and cash drawer connector
Tested Configuration:
| Computer Type: | POS |
| Mother Board Revision: | G41-CPU-Desktop |
| BIOS/uEFI: | WN STD 04/10 04/04/2013 |
| CPU: | Intel Celeron® E1500 2.20GHz |
| RAM: | 2 GB |
| Ports and Bus Types: | PCI Express X1 6 Serial 8 USB Ports 32-bit/33MHz PCI |
| Video Adapter: | Intel GMA X4500 (G41) |
| Host Bus Adapter: | Intel Integrated 82801GB ICH7 , Serial ATA (SATA) |
| Hard Disk Drive: | Seagate® ST9250315AS , Serial ATA (SATA) |
| Test Kit: | System Certification Kit 7.1.0-42.5 |
Config Notes
|
Adapters and Drivers
| Intel GMA X4500 (G41) | |||||||||
| Driver Type: Video Driver | Driver Name: intel_drv.so | ||||||||
| Driver Date: 04-Feb-2012 | Driver Size: 328324 | ||||||||
| Checksum: 49135b9de08a3ba6acca9e8a61da8fa3 | |||||||||
|
|
|||||||||
| Intel Integrated 82583V Gigabit Ethernet Controller | |||||||||
| Driver Type: LAN Driver | Driver Name: e1000e.ko | ||||||||
| Driver Date: 15-Feb-2012 | Driver Size: 239220 | ||||||||
| Checksum: 8c5e4a93254a9dee43c9269262dd38e8 | |||||||||
|
|
|||||||||
| Intel Integrated 82801GB ICH7 | |||||||||
| Driver Type: HBA Driver | Driver Name: ata_piix.ko | ||||||||
| Driver Date: 16-Feb-2012 | Driver Size: 37352 | ||||||||
| Checksum: 3987de7b0d2772eeb9777d87cf553475 | |||||||||
|
|
|||||||||
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Wincor Nixdorf International GmbH
Heinz-Nixdorf-Ring 1
D-33106 Paderborn
GERMANY