|
![](/nbswebapp/YES.png) | Flex System x240 Compute Node (8737 - R2x)
Network Server
Cisco Systems, Inc. | 27 Jun 2013
139128 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 Service Pack 2 for SUSE® SLES 15 |
Product Description
A building block for the PureFlex System family, the IBM Flex System™ x240 Compute Node is an Intel-processor based server optimized for virtualization, performance and highly scalable I/O designed to run a wide variety of workloads in your PureFlex System.
Tested Configuration:
Computer Type: | Blade Module |
Mother Board Revision: | 1 |
BIOS/uEFI: | UEFI: B2E123OUS - v1.30 (03/14/2013) |
CPU: | 2 AMD
EPYC™ 9754 2.25 GHz |
RAM: | 96 GB |
Ports and Bus Types: | 2 USB Ports 2 PCI Express X16 |
Video Adapter: | ASPEED
AST2600 |
Host Bus Adapter: | Samsung®
NVMe SSD Controller PM9A1/PM9A3/980PRO
, NVMe |
Hard Disk Drive: | Samsung®
PM9A3, 960 GB, M.2, NVMe (MZ1L2960HCJR)
, NVMe |
Test Kit: | System Certification Kit 7.2.0-5.9 |
Config Notes
- Install: The SLES install was performed using a virtual DVD device.
|
Adapters and Drivers
| | | | | |
ASPEED
AST2600 |
| Driver Type: Video Driver | Driver Name: ast.ko.zst |
| Driver Date: 17-May-2023 | Driver Size: 50790 |
| Checksum: 5c76baec83b61418041090c658eda587 |
|
Supermicro Computer
AOC-ATG-i2TM 10Gb (Dual port of RJ45) |
| Driver Type: LAN Driver | Driver Name: ixgbe.ko.zst |
| Driver Date: 17-May-2023 | Driver Size: 282219 |
| Checksum: cb01ba5fffd6a4a1a4f4afdccf7393a9 |
|
Samsung®
NVMe SSD Controller PM9A1/PM9A3/980PRO |
| Driver Type: HBA Driver | Driver Name: nvme.ko.zst |
| Driver Date: 17-May-2023 | Driver Size: 39332 |
| Checksum: abc381799f879005e5e3d0ab071371a2 |
| Driver Version: 1.0 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Cisco Systems, Inc.
170 West Tasman Dr.
San Jose
, CA
95134
Voice: (408) 526-4000
Toll Free: (800) 553-NETS or (800) 553-6387
Website: http://www.cisco.com/c/en/us/support/servers-unified-computing/unified-computing-system/products-technical-reference-list.html
|