|
| Flex System x220 Compute Node (7906 - G2x/G4x)
Network Server
Lenovo | 01 Jul 2013
139311 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 with KVM Service Pack 5 for SUSE® SLES 15 |
Other Products:
SUSE® Linux Enterprise Micro 5.5 |
Virtual Machines (Guests OS):
SUSE® Linux Enterprise Server 11 for x86 |
|
SP:
Service Pack 3 for SLES 11 |
Arch:
32pae |
Mode:
Fully Virtualized |
SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 |
|
SP:
Service Pack 3 for SLES 11 |
Arch:
64 |
Mode:
Fully Virtualized |
SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 |
|
SP:
Service Pack 3 for SLES 11 |
Arch:
64 |
Mode:
Paravirtualized |
SUSE® Linux Enterprise Server 11 for x86 |
|
SP:
Service Pack 3 for SLES 11 |
Arch:
32 |
Mode:
Paravirtualized |
Windows Server 2012 |
|
Arch:
64 |
Mode:
Fully Virtualized |
Product Description
The IBM Flex System x220 Compute Node is the next generation cost-optimized compute node designed for less demanding workloads and low-density virtualization. The x220 is efficient and equipped with flexible configuration options and advanced management to run a broad range of workloads.
Tested Configuration:
Computer Type: | Blade Module |
Mother Board Revision: | 1 |
BIOS/uEFI: | UEFI: KSE120BUS - v1.20 (11/22/2012) |
CPU: | 2 Intel
Xeon® Processor E5-2430 2.20 GHz |
RAM: | 24 GB |
Ports and Bus Types: | 2 USB Ports Serial 2 PCI Express X16 |
Video Adapter: | Matrox®
MGA G200eR |
Host Bus Adapter: | IBM
ServeRAID H1135 SAS/SATA Controller
, Serial ATA (SATA) |
Hard Disk Drive: | Seagate®
ST9500620NS 500GB SATA
, Serial ATA (SATA) |
Test Kit: | System Certification Kit 7.2.0-5.10 |
Config Notes
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration.
- SR-IOV: System was tested using SR-IOV where a virtual network adapter was given to a SLES 15 SP5 guest. One of the Intel Ethernet Network Adapter X710-T4L adapters was used in this testing.
- Kdump: the KDUMP_CPUS value in the /etc/sysconfig/kdump configuration file must be set to 2 for correct kdump functionality.
|
Adapters and Drivers
| | | | | |
Matrox®
MGA G200eR |
| Driver Type: Video Driver | Driver Name: mga_drv.so |
| Driver Date: 30-Mar-2013 | Driver Size: 190720 |
| Checksum: cbbe7ba695cb37835f3c7d4e79ec43c5 |
| Driver Version: 1.4.11 |
|
Broadcom®
Integrated BCM5718 Dual-Port Gigabit Ethernet Controller |
| Driver Type: LAN Driver | Driver Name: tg3.ko |
| Driver Date: 14-Jun-2013 | Driver Size: 243623 |
| Checksum: 9835c182afe4d4db35300c0c38cf622d |
| Driver Version: 3.129 |
|
IBM
ServeRAID H1135 SAS/SATA Controller |
| Driver Type: HBA Driver | Driver Name: mpt2sas.ko |
| Driver Date: 14-Jun-2013 | Driver Size: 270935 |
| Checksum: 30d3e55b9d7ecc7e61e3d264c5bbe3b3 |
| Driver Version: 14.100.00.00 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Lenovo
For support regarding this specific configuration, please visit:
support.lenovo.com
|