|
| UCS C420 M3
Network Server
Cisco Systems, Inc. | 02 Jul 2013
139448 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 Service Pack 3 for SUSE® SLES 11 |
Product Description
Cisco UCS C420 M3 Rack Mount Server.
Tested Configuration:
Computer Type: | Rack Mount |
Mother Board Revision: | 73-14688-03 |
BIOS/uEFI: | C420M3.1.5.1b.0.013120131038 (01/31/2013) |
CPU: | 4 Intel
Xeon® Processor E5-4650 2.70 GHz |
RAM: | 32 GB |
Ports and Bus Types: | 2 PCI Express X16 5 PCI Express X8 5 USB Ports Serial |
Video Adapter: | Matrox®
Millennium G200 SE |
Host Bus Adapter: | LSI Logic
MegaRAID SAS 9271-8i
, Serial SCSI (SAS) |
Hard Disk Drive: | 4 Seagate®
ST973452SS
, Serial SCSI (SAS) |
Test Kit: | System Certification Kit 7.2.0-5.3 |
Config Notes
- Install: The SLES install was performed using a virtual DVD device.
- SLES update: SLES 12 SP5 kernel update "kernel-default-4.12.14-122.17.1" or later is required and was installed during certification testing. This kernel update contains a fix to the i40e.ko driver to support the Intel Ethernet Controller X710-AT2 adapter. After the system has been registered with SCC you can install the update with the following command: zypper install kernel-default-4.12.14-122.17.1
|
Referenced Bulletins
150683
Adapters and Drivers
| | | | | |
Matrox®
Millennium G200 SE |
| Driver Type: Video Driver | Driver Name: mga_drv.so |
| Driver Date: 30-Mar-2013 | Driver Size: 190720 |
| Checksum: cbbe7ba695cb37835f3c7d4e79ec43c5 |
| Driver Version: 1.4.11 |
|
Intel
82580DB Gigabit Ethernet Controller(dual port) |
| Driver Type: LAN Driver | Driver Name: igb.ko |
| Driver Date: 13-May-2013 | Driver Size: 287167 |
| Checksum: 7968df7976ade1ff1f47c59817ce578e |
| Driver Version: 4.1.2-k |
|
LSI Logic
MegaRAID SAS 9271-8i |
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| Driver Date: 13-May-2013 | Driver Size: 128551 |
| Checksum: e98806fca01dca0f69d21dc8051140c1 |
| Driver Version: 06.506.00.00-rc1 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Cisco Systems, Inc.
170 West Tasman Dr.
San Jose
, CA
95134
Voice: (408) 526-4000
Toll Free: (800) 553-NETS or (800) 553-6387
Website: http://www.cisco.com/c/en/us/support/servers-unified-computing/unified-computing-system/products-technical-reference-list.html
|