|
| IBM Flex System p270 Compute Node (7954-24X)
Network Server
IBM | 04 Oct 2013
140494 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 11 for IBM Power™ Service Pack 3 for SUSE® SLES 11 |
Product Description
IBM POWER7+ based Flex System Compute Node.
Tested Configuration:
Computer Type: | Blade Module |
Mother Board Revision: | 1 |
BIOS/uEFI: | 1 |
CPU: | 24 IBM
POWER7+ 3.40 GHz |
RAM: | 128 GB |
Ports and Bus Types: | USB Ports 3 PCI Express X8 |
Host Bus Adapter: | IBM
Obsidian-E PCI-E SCSI Controller
, Serial SCSI (SAS) |
Hard Disk Drive: | 2 Seagate®
ST9900805SS 900GB 6Gbp/s SAS
, Serial SCSI (SAS) |
Test Kit: | System Certification Kit 7.2.0-5.10 |
Config Notes
- Install: System Installed via network PXE UEFI boot; the OS was installed using UEFI boot loader and system configuration.
- SR-IOV/PCI Pass-through: Current system configuration does not support network SR-IOV or network PCI pass-through.
|
Adapters and Drivers
| | | | | |
2 Emulex Corporation
BladeEngine 3 - 10Gb Dual-Port Ethernet Controller |
| Driver Type: LAN Driver | Driver Name: be2net.ko |
| Driver Date: 14-Jun-2013 | Driver Size: 174031 |
| Checksum: 170e706f66f906ffe867d14bdff6f239 |
| Driver Version: 4.4.161.0s |
|
IBM
Obsidian-E PCI-E SCSI Controller |
| Driver Type: HBA Driver | Driver Name: ipr.ko |
| Driver Date: 14-Jun-2013 | Driver Size: 213287 |
| Checksum: 3bce48a5eab10a3dc648f147006c87b9 |
| Driver Version: 2.6.0 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|