 | PRIMERGY® CX270 S2
Network Server Fujitsu | 19 Nov 2013
140753 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 Service Pack 3 for SUSE® SLES 11 |
Product Description
Two Fujitsu Server PRIMERGY CX270 S2 dual socket server nodes, each with a condensed half-wide 2U form factor can be packaged into the PRIMERGY CX400 S2 Multi-Node server system, including up to 8 local storage drives in a condensed 2 U rack enclosure. The server node features an optional GPGPU (General Purpose Graphics Processing Unit) from the parallel processing NVIDIA® Tesla™ K-series or a new Intel® Xeon Phi™ coprocessor, to provide the optimal expansion for hardware assisted acceleration in High Performance Computing, analytics and graphic processing, enabling a ten-fold performance boost in HPC applications. With 16 DIMMs for high bandwidth memory modules (1,024 GB), two top-bin CPUs out of the Intel® Xeon® processor E5-2600 family, and 3 PCIe Gen3 IO card slots (1x for GPGPU support) the server node provides great versatility for very ambitious high performance workloads. A range of powerful communication and networking low profile PCIe cards, from 1 to 10 Gb Ethernet, 56 Gb FDR Infiniband, and SAS 2.0 RAID support future proof high speed node connectivity as required in creating large scale-out infrastructures. The CX270 S2 combines high-end computational and graphics performance with high energy efficiency while using shared local fans and power supply units located in the CX400 S2 Multi-Node system. With its condensed half-wide form factor it optimizes large data center scale-out deployment by minimum rack space used and low power envelopes. For more detailed information please refer to the data sheet at: http://docs.ts.fujitsu.com/dl.aspx?id=b2baf2e0-6b18-4d0a-8293-cfcdeba76850
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | D3196 |
| BIOS/uEFI: | UEFI-Legacy Boot: Rev.4A27.3196 (09/27/2013) |
| CPU: | 2 Intel Xeon® Processor E5-2695 v2 2.40 GHz |
| RAM: | 128 GB |
| Ports and Bus Types: | Serial 2 USB Ports 2 PCI Express X8 PCI Express X16 |
| Video Adapter: | ASPEED AST2300 |
| Host Bus Adapter: | Fujitsu RAID Ctrl SAS 6G 5/6 512MB (D2616) , Serial SCSI (SAS) |
| Hard Disk Drive: | 3 Seagate® ST9300605SS , Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 7.2.0-5.10 |
Config Notes
|
Adapters and Drivers
| ASPEED AST2300 | |||||||||
| Driver Type: Video Driver | Driver Name: ast_drv.so | ||||||||
| Driver Date: 30-May-2013 | Driver Size: 96096 | ||||||||
| Checksum: 41733d0f905440b2b69759ee4d3dda05 | |||||||||
| Driver Version: 0.92.2 | |||||||||
|
|
|||||||||
| Fujitsu RAID Ctrl SAS 6G 5/6 512MB (D2616) | |||||||||
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko | ||||||||
| Driver Date: 14-Jun-2013 | Driver Size: 128775 | ||||||||
| Checksum: 36c2f0e7dab4f4c97ea2e019d1fb44da | |||||||||
| Driver Version: 06.506.00.00-rc1 | |||||||||
|
|
|||||||||
| Intel Ethernet Controller I350-AM2 (Dual Port) | |||||||||
| Driver Type: LAN Driver | Driver Name: igb.ko | ||||||||
| Driver Date: 14-Jun-2013 | Driver Size: 287167 | ||||||||
| Checksum: 81bfd34fb256a6fa3cab6fc2f6e9ed3e | |||||||||
| Driver Version: 4.1.2-k | |||||||||
|
|
|||||||||
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Fujitsu
Fujitsu Technology Solutions GmbH
Heinz-Nixdorf-Ring 1
Paderborn 33106
GERMANY
Website: http://ts.fujitsu.com/products/standard_servers/index.html