|
| PRIMERGY® BX920 S4
Network Server
VMware, Inc. | 27 Oct 2014
142085 |
SUSE YES Certified for the following products:
Virtual Machines (Guests OS):
SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 |
|
SP:
Service Pack 3 for SLES 11 |
Arch:
64 |
Mode:
Fully Virtualized |
SUSE® Linux Enterprise Server 12 for AMD64 & Intel64 |
|
Arch:
64 |
Mode:
Fully Virtualized |
Windows Server 2008 |
|
SP:
Service Pack 2 for Windows Server 2008 |
Arch:
32pae |
Mode:
Fully Virtualized |
Product Description
The Fujitsu Server PRIMERGY BX920 S4 is the new general-purpose dual-socket server blade for the PRIMERGY BX400 and BX900, designed for cost-optimized performance, reliability and holistic server lifecycle management. The BX920 S4 provides breakthrough server blade economics for essential enterprise workloads, virtual client computing scenarios and infrastructure services. It is equipped with CPUs of the latest Intel® Xeon® processor E5-2400v2 product family, delivers up to 768GB of memory and 1600MHz speeds via 12 DIMMs, two hot-plug hard disk drives, multiple RAID options for internal storage, and flexible networking options via the onboard dual-channel 10Gbit/s Ethernet Converged Network Adapter, delivering the performance and versatility needed in an enterprise data center. Fujitsu Server PRIMERGY BX920 S4 supports FUJITSU Software ServerView® Suite integrated Remote Management Controller (iRMC S4) that enables extensive monitoring and management of servers regardless of their system status – even at decentralized locations. iRMC S4 combines long- term expertise and practical experience gained with its successful predecessors with additional unctionalities such as remote control of server- internal HDDs and RAID configurations also in agentless out-of-band operation. For more detailed information please refer to the data sheet at: http://docs.ts.fujitsu.com/dl.aspx?id=a5286fe5-3c5a-4749-86a3-172316ce3cb9
Tested Configuration:
Computer Type: | Blade Module |
Mother Board Revision: | D3142 |
BIOS/uEFI: | UEFI-Legacy: R1.7.0 (03/20/2014) |
CPU: | 2 Intel
Xeon® Processor E5-2470 v2 2.40 GHz |
RAM: | 64 GB |
Ports and Bus Types: | 3 USB Ports 2 PCI Express X8 |
Video Adapter: | Matrox®
MGA G200e |
Host Bus Adapter: | Fujitsu
SAS RAID HDD module 8Gbit/s (D2816C)
, Serial SCSI (SAS) |
Hard Disk Drive: | 2 Seagate®
Savvio® 15K.3, 2.5-inch 300 GB 15K 6Gb/s SAS (ST9300653SS)
, Serial SCSI (SAS) |
Test Kit: | System Certification Kit 7.3.0-94.2 |
Config Notes
- VMware guest OS installation information can be found at: http://partnerweb.vmware.com/GOSIG/SLE_15.html.
- VMware recommends using the Open VM Tools redistributed by operating system vendors. For additional information, see knowledge base article 2073803 at http://kb.vmware.com/kb/2073803.
- VMware recommends using the paravirtual drivers contributed upstream and redistributed by operating system vendors . For additional information, see knowledge base article 2073804 at https://kb.vmware.com/kb/2073804.
- The VMware Memory Ballooning driver included in SLES 15 SP1 is auto loaded to improve the virtual machine memory performance.
- System certification testing was performed with a SLES 15 SP1 64-bit virtual machine installed on UEFI firmware with Secure Boot enabled and configured with up to 128 CPUs and 6128 GB of memory.
|
Adapters and Drivers
| | | | | |
Matrox®
MGA G200e |
| Driver Type: Video Driver | Driver Name: mgag200.ko |
| Driver Date: 19-Aug-2014 | Driver Size: 97007 |
| Checksum: ff7887102425f2bba08fd653c21d6ebb |
|
| Driver Type: Video Driver | Driver Name: drm.ko |
| Driver Date: 20-Aug-2014 | Driver Size: 523047 |
| Checksum: c2085f6f03b27b773f5c64c8b727eefb |
|
| Driver Type: Video Driver | Driver Name: mga_drv.so |
| Driver Date: 17-Jul-2014 | Driver Size: 124048 |
| Checksum: bed8e78793d30a8ec1b55a623d5647a3 |
| Driver Version: 1.6.3 |
|
Emulex Corporation
OneConnect 10Gb Ethernet Adapter OCe11102-N (Dual Port) |
| Driver Type: LAN Driver | Driver Name: be2net.ko |
| Driver Date: 20-Aug-2014 | Driver Size: 177119 |
| Checksum: 385acdc6179a18f2d0651757f9ec1bfd |
| Driver Version: 10.0.600.0s |
|
Fujitsu
SAS RAID HDD module 8Gbit/s (D2816C) |
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| Driver Date: 19-Aug-2014 | Driver Size: 168407 |
| Checksum: dffa65a5656721e9da8e501ba6606dde |
| Driver Version: 06.803.01.00-rc1 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
VMware, Inc.
3401 Hillview Ave
Palo Alto
, CA
94304
Voice: 1-650-427-5000
Toll Free: 1-877-486-9273
Fax: 650-427-5001
Website: www.vmware.com
|