 | BEETLE /M-III K2.0
Workstation Wincor Nixdorf International GmbH | 08 Jan 2015
142584 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Desktop 11 for x86 Service Pack 3 for SUSE® SLED 11 |
Other Products:
| SUSE® LINUX Enterprise Point of Service (SLEPOS) |
Product Description
BEETLE Box for POS with enhanced serial ports and cash drawer connector.
Tested Configuration:
| Computer Type: | POS |
| Mother Board Revision: | K2.0-H81-uATX Printstand C |
| BIOS/uEFI: | UEFI-Legacy: WN STD 02/03 (12/04/2014) |
| CPU: | Intel Celeron Processor G1820 2.70 GHz |
| RAM: | 4 GB |
| Ports and Bus Types: | PCI Express X16 2 PCI Express X1 32-bit/33MHz PCI 6 Serial 8 USB Ports |
| Video Adapter: | Intel HD Graphics |
| Host Bus Adapter: | Intel DH82H81 PCH , Serial ATA (SATA) |
| Hard Disk Drive: | Seagate® ST500DM002 , Serial ATA (SATA) |
| Test Kit: | System Certification Kit 7.3.0-113.3 |
Config Notes
|
Referenced Bulletins
141853
Adapters and Drivers
| Intel HD Graphics | |||||||||
| Driver Type: | Driver Name: intel_drv.so | ||||||||
| Driver Date: 29-May-2013 | Driver Size: 327876 | ||||||||
| Driver Version: 2.21.4 | |||||||||
|
|
|||||||||
| Intel Ethernet Connection I217-LM | |||||||||
| Driver Type: LAN Driver | Driver Name: e1000e.ko | ||||||||
| Driver Date: 14-Jun-2013 | Driver Size: 278487 | ||||||||
| Checksum: e45ab312be4ac19802d48c94bbf0d922 | |||||||||
| Driver Version: 2.1.4-k | |||||||||
|
|
|||||||||
| Intel DH82H81 PCH | |||||||||
| Driver Type: HBA Driver | Driver Name: ahci.ko | ||||||||
| Driver Date: 14-Jun-2013 | Driver Size: 48215 | ||||||||
| Checksum: 5ebd17f69bbf0af9ccfca8f23d7c0762 | |||||||||
| Driver Version: 3.0 | |||||||||
|
|
|||||||||
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Wincor Nixdorf International GmbH
Heinz-Nixdorf-Ring 1
D-33106 Paderborn
GERMANY