|
| UCS B460 M4
Network Server
IBM | 21 May 2015
143169 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 11 for x86 Service Pack 1 for SUSE® SLES 11 |
Product Description
UCS B460 M4, http://www.cisco.com/c/en/us/products/servers-unified-computing/ucs-b-series-blade-servers
Tested Configuration:
Computer Type: | Blade Module |
Mother Board Revision: | 4.0 |
BIOS/uEFI: | UEFI Legacy: EXM4.2.2.5.0.050420151500 |
CPU: | 4 Intel
Xeon® Processor E7-4850 v3 2.20 GHz |
RAM: | 384 GB |
Ports and Bus Types: | USB Ports 4 PCI Express X16 |
Video Adapter: | Matrox®
MGA G200e |
Host Bus Adapter: | Cisco
UCS VIC 1380 (HBA)
, FibreChannel LSI Logic
MegaRAID SAS-3 3008
, Serial SCSI (SAS) |
Hard Disk Drive: | Seagate®
ST300MM0026
, Serial SCSI (SAS) Unigen
PSE4000S3
, USB |
Storage Area Network (SAN) Device: | EMC
Symmetrix VMAX |
Test Kit: | System Certification Kit 7.3.0-113.1 |
Config Notes
- Install: PXE boot and network install requires the "?device=eth0" to be added to the install server boot process.
- Integrated network: only two of the four ethernet adapters/ports on the I350-AM4 quad-port network controller are enabled on this system.
|
Adapters and Drivers
| | | | | |
Matrox®
MGA G200e |
| Driver Type: Video Driver | Driver Name: mga |
| Driver Date: 29-May-2013 | Driver Size: 190720 |
| Checksum: cbbe7ba695cb37835f3c7d4e79ec43c5 |
| Driver Version: 1.4.11 |
|
Cisco
UCS VIC 1380 (NIC) |
| Driver Type: LAN Driver | Driver Name: enic.ko |
| Driver Date: 14-Jun-2013 | Driver Size: 108591 |
| Checksum: 9b887c21844aae3640e458c52b3c56d0 |
| Driver Version: 2.1.1.39 |
|
Cisco
UCS VIC 1380 (HBA) |
| Driver Type: HBA Driver | Driver Name: fnic.ko |
| Driver Date: 14-Jun-2013 | Driver Size: 163231 |
| Checksum: db9b1dca0053d09139c8b63c29f30d38 |
| Driver Version: 1.5.0.22 |
|
LSI Logic
MegaRAID SAS-3 3008 |
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| Driver Date: 04-Nov-2014 | Driver Size: 1962718 |
| Checksum: b4e180ee4da138ad10782bc589b4d78e |
| Driver Version: 06.806.08.00 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|