|
| Integrity Superdome X-BL920s Gen8 System
Network Server
IBM | 21 May 2015
143174 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 12 for AMD64 & Intel64 with KVM |
Product Description
For more information, please visit http://www.hp.com/go/proliantlinux
Tested Configuration:
Computer Type: | Super Server |
Mother Board Revision: | AT068A |
BIOS/uEFI: | UEFI: 6.0.42 (04/02/2015) |
CPU: | 16 Intel
Xeon® Processor E7-2890 v2 2.80 GHz |
RAM: | 12288 GB |
Ports and Bus Types: | 24 PCI Express X8 16 PCI Express X16 2 USB Ports |
Video Adapter: | Matrox®
G200eH |
Host Bus Adapter: | 8 HP
QMH2672 16Gb Fibre Channel Host Bus Adapter
, FibreChannel |
Hard Disk Drive: | HP
C8S59A MSA 900GB 6G SAS 10K SFF
, Serial SCSI (SAS) |
Storage Area Network (SAN) Device: | HP
C8R15A MSA 2040 SAN Dual Controller SFF Storage |
Test Kit: | System Certification Kit 7.3.0-113.3 |
Config Notes
- Kdump (SLE12SP3): the crash kernel reserved memory parameters were increased from the default to crashkernel=182M,high crashkernel=122M,low using YaST.
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration. Disk configuration: HDD one disk configured as RAID 0 and M.2 boot device with two SSDs configured as a RAID 0 device.
|
Adapters and Drivers
| | | | | |
Matrox®
G200eH |
| Driver Type: Video Driver | Driver Name: mgag200.ko |
| Driver Date: 20-Feb-2015 | Driver Size: 97711 |
| Checksum: 09a98fdf859a5d7b29a5cf0bff35f8e5 |
|
8 HP
Ethernet 10Gb 2-port 560FLB Adapter |
| Driver Type: LAN Driver | Driver Name: ixgbe.ko |
| Driver Date: 20-Feb-2015 | Driver Size: 448271 |
| Checksum: d6b2f497034cae0b231a55ca7b14a722 |
| Driver Version: 3.19.1-k |
|
8 HP
QMH2672 16Gb Fibre Channel Host Bus Adapter |
| Driver Type: HBA Driver | Driver Name: qla2xxx.ko |
| Driver Date: 20-Feb-2015 | Driver Size: 1003231 |
| Checksum: 68e249e41f5b7339e108e757c47c7833 |
| Driver Version: 8.07.00.08.12.0- |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|