|
| IBM Flex System p460 Compute Node (7895-43X)
Network Server
IBM | 02 Oct 2015
143627 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 11 for IBM Power™ Service Pack 4 for SUSE® SLES 11 |
Product Description
IBM Flex System p460 Compute Node (7895-43X)
Tested Configuration:
Computer Type: | Blade Module |
Mother Board Revision: | 1 |
BIOS/uEFI: | 1 |
CPU: | 32 IBM
POWER7+ 4.10 GHz |
RAM: | 120 GB |
Ports and Bus Types: | 4 PCI Express X8 USB Ports |
Host Bus Adapter: | IBM
Obsidian-E PCI-E SCSI Controller
, Serial SCSI (SAS) |
Hard Disk Drive: | Toshiba
MBF2300RC
, Serial SCSI (SAS) Seagate®
ST9600204SS
, Serial SCSI (SAS) |
Test Kit: | System Certification Kit 7.4.0-30.3 |
Config Notes
- Install: The SUSE® Linux Enterprise Server install was performed using a network install method.
- Power management: The System/Processor dynamic CPU frequency scaling functionality in SLES is not supported on POWER7+ as this functionality is provided by the POWER7+ hardware itself.
- Headless configuration - no graphics adapter. System configured using IBM Flex System Chassis Management Module (CMM) for graphics, keyboard and mouse.
|
Adapters and Drivers
| | | | | |
2 Emulex Corporation
OneConnect 10Gb Ethernet Adapter OCe11102-N (Dual Port) |
| Driver Type: LAN Driver | Driver Name: be2net.ko |
| Driver Date: 24-Jun-2015 | Driver Size: 198839 |
| Checksum: e250703978ff481f6d9ac735f0403879 |
| Driver Version: 10.4s |
|
IBM
Obsidian-E PCI-E SCSI Controller |
| Driver Type: HBA Driver | Driver Name: ipr.ko |
| Driver Date: 24-Jun-2015 | Driver Size: 221527 |
| Checksum: a3c9af9381086229aa0eb35f1efcede9 |
| Driver Version: 2.6.0 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|