|
| UCS B420 M4
Network Server
Cisco Systems, Inc. | 17 Dec 2015
143931 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 12 for AMD64 & Intel64 Service Pack 1 for SUSE® SLES 12 |
Other Products:
SUSE® OpenStack Cloud 6 - Admin & Control Node |
Product Description
UCS B420 M4; http://www.cisco.com/c/en/us/products
Tested Configuration:
Computer Type: | Blade Module |
Mother Board Revision: | 4.0 |
BIOS/uEFI: | UEFI-Legacy: B420M4.2.2.6a.0.080520151857 (08/05/2015) |
CPU: | 4 Intel
Xeon® Processor E5-4669 v3 2.10 GHz |
RAM: | 32 GB |
Ports and Bus Types: | 2 PCI Express X16 USB Ports |
Video Adapter: | Matrox®
MGA G200e |
Host Bus Adapter: | LSI Logic
MegaRAID SAS-3 3108
, Serial SCSI (SAS) Cisco
UCS VIC 1380 (HBA)
, FibreChannel |
Hard Disk Drive: | Toshiba
AL13SEB600
, Serial SCSI (SAS) |
Storage Area Network (SAN) Device: | EMC
Symmetrix VMAX |
Test Kit: | System Certification Kit 7.5.0-17.1 |
Config Notes
- Install: The SLES install was performed using a virtual DVD device.
- Kdump: the crash kernel reserved memory parameters were increased from the default to "crashkernel=512M,high crashkernel=512M,low" using YaST.
|
Adapters and Drivers
| | | | | |
Matrox®
MGA G200e |
| Driver Type: Video Driver | Driver Name: mgag200.ko |
| Driver Date: 27-Oct-2015 | Driver Size: 97943 |
| Checksum: 7920de3e1726e5ab4ccdb446135380fb |
|
Cisco
UCS VIC 1380 (NIC) |
| Driver Type: LAN Driver | Driver Name: enic.ko |
| Driver Date: 27-Oct-2015 | Driver Size: 136391 |
| Checksum: d126c5fc402696169fbd20faed037cdc |
| Driver Version: 2.1.1.83 |
|
LSI Logic
MegaRAID SAS-3 3108 |
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| Driver Date: 27-Oct-2015 | Driver Size: 193671 |
| Checksum: c5ee3766f934178ec06927bce00b80f8 |
| Driver Version: 06.807.10.00-rc1 |
|
Cisco
UCS VIC 1380 (HBA) |
| Driver Type: HBA Driver | Driver Name: fnic.ko |
| Driver Date: 27-Oct-2015 | Driver Size: 205135 |
| Checksum: 19dcd2bd2c495f6b208d5de1de992824 |
| Driver Version: 1.6.0.17 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Cisco Systems, Inc.
170 West Tasman Dr.
San Jose
, CA
95134
Voice: (408) 526-4000
Toll Free: (800) 553-NETS or (800) 553-6387
Website: http://www.cisco.com/c/en/us/support/servers-unified-computing/unified-computing-system/products-technical-reference-list.html
|