|
| PRIMERGY® TX2560 M2
Network Server
IBM | 02 Jun 2016
144633 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 Service Pack 2 for SUSE® SLES 11 |
Virtual Machines (Guests OS):
SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 |
|
SP:
Service Pack 4 for SLES 11 |
Arch:
64 |
Mode:
Fully Virtualized |
SUSE® Linux Enterprise Server 12 for AMD64 & Intel64 |
|
SP:
Service Pack 1 for SLES 12 |
Arch:
64 |
Mode:
Fully Virtualized |
Windows Server 2008 |
|
SP:
Service Pack 2 for Windows Server 2008 |
Arch:
64 |
Mode:
Fully Virtualized |
Product Description
The FUJITSU Server PRIMERGY TX2560 M2 offers
maximum performance, best expandability and
highest availability without any compromises.
Branches, data centers and SMEs value the
performance of up to two Intel® Xeon® E5 v4
processors in combination with a maximum
1536 GB DDR4 memory. Up to 10 extension
slots and up to 32 2.5-inch hard disks enable
excellent expandability options. Thanks to a
redundant power supply and fans as well as a
range of different RAID controllers the Tower
Server ensures top availability levels and “peace
of mind”. The server is thus ideal for performance
hungry applications, virtualization solutions
and storage demanding scenarios. Furthermore,
the comprehensive Fujitsu ServerView® Suite
provides support for administrators during server
installation, deployment and administration.
For more detailed information, please refer to the data sheet at:
http://docs.ts.fujitsu.com/dl.aspx?id=2a169d43-2675-4219-b236-d7ccd525dc35
Tested Configuration:
Computer Type: | Tower |
Mother Board Revision: | D3289-B |
BIOS/uEFI: | BIOS/UEFI-Legacy: R1.6.0 (03/11/2016) |
CPU: | 2 Intel
Xeon® Processor E5-2667 v4 3.20 GHz |
RAM: | 64 GB |
Ports and Bus Types: | 9 USB Ports 5 PCI Express X8 3 PCI Express X16 Serial 4 PCI Express X4 |
Video Adapter: | Matrox®
G200e |
Host Bus Adapter: | Fujitsu
PRAID CP400i
, Serial SCSI (SAS) |
Hard Disk Drive: | 4 Hitachi GST
HUC156045CSS204
, Serial SCSI (SAS) |
Test Kit: | System Certification Kit 7.5.0-20.4 |
Config Notes
- Hard Disk Configuration: RAID 5 with hot-spare
- Install: PXE Boot, OS Installed via Network.
|
Referenced Bulletins
137782
Adapters and Drivers
| | | | | |
Matrox®
G200e |
| Driver Type: Video Driver | Driver Name: drm.ko |
| Driver Date: 11-Nov-2015 | Driver Size: 524567 |
| Checksum: ea67ead62c08bc1d779ca8f94688f21b |
|
| Driver Type: Video Driver | Driver Name: mga_drv.so |
| Driver Date: 17-Jul-2014 | Driver Size: 124048 |
| Checksum: bed8e78793d30a8ec1b55a623d5647a3 |
| Driver Version: 1.6.3 |
|
| Driver Type: Video Driver | Driver Name: mgag200.ko |
| Driver Date: 11-Nov-2015 | Driver Size: 97943 |
| Checksum: a9ff8d5c05122cb81c250915190b6b5d |
|
Fujitsu
DynamicLOM based on Emulex XE100 series (4x 1Gbit/s) |
| Driver Type: LAN Driver | Driver Name: be2net.ko |
| Driver Date: 11-Nov-2015 | Driver Size: 199527 |
| Checksum: 6756afc6bc3be90c3ddf639f1c284f58 |
| Driver Version: 10.6.0.2 |
|
Fujitsu
PRAID CP400i |
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| Driver Date: 11-Nov-2015 | Driver Size: 193671 |
| Checksum: 231400c0c6871290e279dba7766c2fd7 |
| Driver Version: 06.807.10.00-rc1 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|