|
| NF5270M4
Network Server
Inspur Corporation | 26 Jun 2017
145659 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 12 for AMD64 & Intel64 Service Pack 2 for SUSE® SLES 12 |
Product Description
For more information, please visit http://www.inspur.com
Tested Configuration:
Computer Type: | Rack Mount |
Mother Board Revision: | NF5270M4 |
BIOS/uEFI: | UEFI: 4.1.13 (07/26/2016) |
CPU: | 2 Intel
Xeon® Processor E5-2620 v4 2.10 GHz |
RAM: | 112 GB |
Ports and Bus Types: | 3 USB Ports 3 PCI Express X8 3 PCI Express X16 PCI Express X1 |
Video Adapter: | ASPEED
AST2400 |
Host Bus Adapter: | LSI Logic
MegaRAID SAS-3 3008
, Serial SCSI (SAS) |
Hard Disk Drive: | 2 Seagate®
Constellation ES.3 ST2000NM0023 (2TB)
, Serial SCSI (SAS) |
Test Kit: | System Certification Kit 7.6.0-53.1 |
Config Notes
- Install: The SLES install was performed using a virtual DVD device.
- Kdump: the crash kernel reserved memory parameters were increased from the default to crashkernel=1024MB high, crashkernel=256MB low using YaST.
|
Adapters and Drivers
| | | | | |
ASPEED
AST2400 |
| Driver Type: Video Driver | Driver Name: ast_drv.so |
| Driver Date: 14-Oct-2016 | Driver Size: 114288 |
| Checksum: d8354d50377cbbdc635b0a299a0f5d38 |
| Driver Version: 1.1.5 |
|
Intel
Ethernet Controller I350-AM2 (Dual Port) |
| Driver Type: LAN Driver | Driver Name: igb.ko |
| Driver Date: 25-Oct-2016 | Driver Size: 351071 |
| Checksum: b8dee794a1123732c7ba8475033703e3 |
| Driver Version: 5.3.0-k |
|
LSI Logic
MegaRAID SAS-3 3008 |
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| Driver Date: 25-Oct-2016 | Driver Size: 216703 |
| Checksum: 43d97f95db88b476471065c1667d0589 |
| Driver Version: 06.810.09.00-rc1 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Inspur Corporation
Building C. NO.2
Xinxi Road
Shangdi, Haidian District
Beijing
100080
CHINA
|