|
| PowerEdge M640
Network Server
Fujitsu | 26 Sep 2017
145972 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Desktop 11 for AMD64 & Intel64 Service Pack 1 for SUSE® SLED 11 |
Product Description
The PowerEdge M640 is supported on both Dell PowerEdge VRTX and PowerEdge M1000e
Blade Chassis. The Dell Shared PERC 8 card is located between the storage array
and the power distribution board on the VRTX planar. The Dell Shared PERC H730P
slot routes SAS to the nearby planar miniSAS connectors, which are used to
internally cable SAS from the PERC to the SAS expander cards in the storage
array. Please visit www.dell.com/vrtx for VRTX detail information. Please visit
www.dell.com for more information.
Tested Configuration:
Computer Type: | Blade Module |
Mother Board Revision: | A00 |
BIOS/uEFI: | UEFI: 1.0.0 (08/10/2017) |
CPU: | 2 Intel
Xeon® Platinum 8180 Processor 2.50 GHz |
RAM: | 1 TB |
Ports and Bus Types: | 2 USB Ports 2 PCI Express X8 2 PCI Express X4 |
Video Adapter: | Matrox®
G200eW3 |
Host Bus Adapter: | Dell
Shared PERC 8
, Serial SCSI (SAS) Dell
PowerEdge RAID Controller H730P Mini
, Serial SCSI (SAS) Intel
C621 Chipset
, Serial ATA (SATA) |
Hard Disk Drive: | 2 Seagate®
Enterprise Performance 15K HDD (ST900MP0136) 900GB SAS
, Serial SCSI (SAS) Toshiba
AL13SEB300
, Serial SCSI (SAS) |
CD/DVD: | HLDS
GU60N
, Serial ATA (SATA) |
Test Kit: | System Certification Kit 7.6.0-53.1 |
Config Notes
- Kernel parameter: CPU Frequency was tested with the following kernel boot parameter: intel_pstate=disable.
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration.
- Kdump (SLE12SP3): the crash kernel reserved memory parameters were increased from the default to crashkernel=128M,high crashkernel=128M,low using YaST.
|
Adapters and Drivers
| | | | | |
Matrox®
G200eW3 |
| Driver Type: Video Driver | Driver Name: mgag200.ko |
| Driver Date: 25-Oct-2016 | Driver Size: 95983 |
| Checksum: 47ef1d90155625b73d3d4281ce034251 |
|
Intel
Gigabit 4P I350 bNDC (Quad Port) |
| Driver Type: LAN Driver | Driver Name: igb.ko |
| Driver Date: 25-Oct-2016 | Driver Size: 351071 |
| Checksum: b8dee794a1123732c7ba8475033703e3 |
| Driver Version: 5.3.0-k |
|
Dell
Shared PERC 8 |
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| Driver Date: 25-Oct-2016 | Driver Size: 216703 |
| Checksum: 43d97f95db88b476471065c1667d0589 |
| Driver Version: 06.810.09.00-rc1 |
|
Dell
PowerEdge RAID Controller H730P Mini |
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| Driver Date: 25-Oct-2016 | Driver Size: 216703 |
| Checksum: 43d97f95db88b476471065c1667d0589 |
| Driver Version: 06.810.09.00-rc1 |
|
Intel
C621 Chipset |
| Driver Type: HBA Driver | Driver Name: ahci.ko |
| Driver Date: 25-Oct-2016 | Driver Size: 72895 |
| Checksum: f0ad0f11072e317bc80570a7483343e9 |
| Driver Version: 3.0 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Fujitsu
Fujitsu Technology Solutions GmbH
TSP CLI E SW OSE
Bürgermeister-Ulrich-Strasse 100
Augsburg
86199
GERMANY
Voice: +49 (0)821 804-3321
|