|
| PRIMERGY® RX1330 M3
Network Server
IBM | 16 Jul 2018
146849 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 with KVM
Service Pack 2 for SUSE® SLES 11 |
Product Description
The FUJITSU Server PRIMERGY RX1330 M3 is a mono-socket rack server designed to meet small budgets by delivering highest energy efficiency and a rich set of optional expansions to meet individual demands. Optimized for infrastructure and communication applications as well as administration and small file server, this 1U systems features up to 64 GB RAM, up to 3 PCIe slots and up to 10 hard disk drives. For more technical details, please refer to the data sheet at: https://sp.ts.fujitsu.com/dmsp/Publications/public/ds-py-rx1330-m3.pdf
Tested Configuration:
Computer Type: | Rack Mount |
Mother Board Revision: | D3375-B12 |
BIOS/uEFI: | UEFI: R1.18.0 (04/26/2018) |
CPU: | Intel
Xeon® Processor E3-1240 v6 @ 3.7GHz |
RAM: | 32 GB |
Ports and Bus Types: | 6 USB Ports PCI Express X4 2 PCI Express X8 |
Video Adapter: | Matrox®
G200e |
Host Bus Adapter: | Fujitsu
PRAID EP420i
, Serial SCSI (SAS) |
Hard Disk Drive: | 4 Hitachi GST
UltraStar C10K1800 HUC101830CSS204
, Serial SCSI (SAS) |
Test Kit: | System Certification Kit 8.1.0-80.1 |
Config Notes
- Maintenance update: Kernel 3.0.82-0.7 from official SLED 11 SP3 update channel was installed to provide support for hibernate and sleep.
- Graphics: Video driver used in testing was downloaded from http://www.hp.com/support/workstations and requires installation of kernel source and development tools. Video driver is not SUSE SolidDriver compliant.
|
Referenced Bulletins
141147
Adapters and Drivers
| | | | | |
Matrox®
G200e |
| Driver Type: Video Driver | Driver Name: mgag200.ko |
| Driver Date: 02-May-2018 | Driver Size: 105288 |
| Checksum: 33744b54c1e2edb1c64d9a288005bdc8 |
|
2 Intel
Ethernet Controller I210-AT |
| Driver Type: LAN Driver | Driver Name: igb.ko |
| Driver Date: 02-May-2018 | Driver Size: 489024 |
| Checksum: 99ed785fd93461cfe24eeddc542a69dd |
| Driver Version: 5.4.0-k |
|
Fujitsu
PRAID EP420i |
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| Driver Date: 02-May-2018 | Driver Size: 288872 |
| Checksum: e67ac5239c6b755dd0a1bffc9ee715f4 |
| Driver Version: 07.704.04.00-rc1 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|