 | PRIMERGY® BX2580 M2
Network Server Fujitsu | 21 Nov 2018
147237 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 |
Product Description
Optimized for a broad spectrum of workloads including virtualized workloads, consolidating applications as well as ERP and CRM applications, the PRIMERGY BX2580 M2 provides dense computing features with ultra-large memory capabilities. The server blade delivers improved performance for data centers and remote sites. Based on the latest Intel® Xeon® processor E5- 2600 v4, it offers up to 1536 GB of memory (24 DIMM slots) and up to two disk drives. The PRIMERGY BX2580 M2 offers exceptional levels of flexibility and I/O throughput to run the most demanding applications. The system is equipped with a quad port 1 Gigabit Ethernet, Data Center Bridging (DCB)-capable LAN on motherboard (LOM) that supports NIC, iSCSI, and FCoE and can in addition be configured with two mezzanine cards. The onboard converged network adapter can be partitioned in up to eight physical functions pert port that can be dynamically configured. The adapters serve as a common interface for both storage and IP traffic retaining familiar FC and networking software stacks, OS drivers, and management.
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | D3321 |
| BIOS/uEFI: | UEFI: R1.16.0 (07/27/2018) |
| CPU: | 2 Intel Xeon® Processor E5-2637 v4 3.50 GHz |
| RAM: | 352 GB |
| Ports and Bus Types: | 2 PCI Express X8 6 USB Ports |
| Video Adapter: | Matrox® G200e |
| Host Bus Adapter: | Fujitsu PRAID EM400i , Serial ATA (SATA) |
| Hard Disk Drive: | 2 Seagate® ST1000NX0313 , Serial ATA (SATA) |
| Test Kit: | System Certification Kit 8.1.0-83.2 |
Config Notes
|
|
Referenced Bulletins
146823
Adapters and Drivers
| Matrox® G200e | |||||||||
| Driver Type: Video Driver | Driver Name: mgag200.ko | ||||||||
| Driver Date: 31-May-2018 | Driver Size: 105288 | ||||||||
| Checksum: 1eae76e8c5bf871e23a8cf646aaf1ed6 | |||||||||
|
|
|||||||||
| Fujitsu DynamicLOM based on Emulex XE100 series (4x 1Gbit/s) | |||||||||
| Driver Type: LAN Driver | Driver Name: be2net.ko | ||||||||
| Driver Date: 31-May-2018 | Driver Size: 292464 | ||||||||
| Checksum: 393bd3f3b935c41d800f1cc0f636da9f | |||||||||
| Driver Version: 11.4.0.0 | |||||||||
|
|
|||||||||
| Fujitsu PRAID EM400i | |||||||||
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko | ||||||||
| Driver Date: 31-May-2018 | Driver Size: 288872 | ||||||||
| Checksum: 05a11c19ea5020998382f29c3ae31971 | |||||||||
| Driver Version: 07.704.04.00-rc1 | |||||||||
|
|
|||||||||
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Fujitsu
Fujitsu Technology Solutions GmbH
Mies-van-der-Rohe-Strasse 8
München 80807
GERMANY