|
| Lyskamm_S212G13-224
Network Server
Supermicro Computer | 31 Jan 2019
147615 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 12 for AMD64 & Intel64 Service Pack 5 for SUSE® SLES 12 |
Virtual Machines (Guests OS):
2
SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 |
|
Arch:
64 |
Mode:
Fully Virtualized |
Windows Server 2012 R2 |
|
Arch:
64 |
Mode:
Fully Virtualized |
Product Description
For more information, please visit www.wistron.com.
Tested Configuration:
Computer Type: | Rack Mount |
Mother Board Revision: | 879979-002 |
BIOS/uEFI: | UEFI: O172TR2 2.3.2 (11/21/2018) |
CPU: | 2 Intel
Xeon® Platinum 8176 Processor 2.10 GHz |
RAM: | Host Platform: 1 TB, 64-bit VM Guests: 260 GB, Single Max VM 64-bit Guest Tested Memory: 976 GB |
Ports and Bus Types: | PCI Express X8 3 PCI Express X16 3 USB Ports |
Video Adapter: | ASPEED
AST2500 |
Host Bus Adapter: | Samsung®
NVMe SSD Controller PM961
, NVMe |
Hard Disk Drive: | Samsung®
PM961
, NVMe |
Test Kit: | System Certification Kit 8.2.0-15.5 |
Config Notes
- Install: The SLES install was performed using a virtual DVD device.
- SLES update: SLES 12 SP5 kernel update "kernel-default-4.12.14-122.17.1" or later is required and was installed during certification testing. This kernel update contains a fix to the i40e.ko driver to fix an issue where the two RJ45 ports are not detected, only the two SFP+ ports are detected on the Intel Ethernet Controller X710-TM4 adapter. After the system has been registered with SCC you can install the update with the following command: zypper install kernel-default-4.12.14-122.17.1
|
Referenced Bulletins
150687
Adapters and Drivers
| | | | | |
ASPEED
AST2500 |
| Driver Type: Video Driver | Driver Name: ast.ko |
| Driver Date: 31-May-2018 | Driver Size: 130632 |
| Checksum: 2b1d7c8b92a90ff3b3c5fce07dcc9ffe |
|
Broadcom®
NetXtreme® E-Series BCM57416 10GBASE-T PCIe 3.0 Ethernet Controller |
| Driver Type: LAN Driver | Driver Name: bnxt_en.ko |
| Driver Date: 31-May-2018 | Driver Size: 344152 |
| Checksum: 5ad93a791c298c8a4120f282b7295a2a |
| Driver Version: 1.8.0 |
|
Samsung®
NVMe SSD Controller PM961 |
| Driver Type: HBA Driver | Driver Name: nvme.ko |
| Driver Date: 31-May-2018 | Driver Size: 80456 |
| Checksum: e47869735c90f70485cbe2225553cce8 |
| Driver Version: 1.0 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Supermicro Computer
980 Rock Ave.
San Jose
, CA
95131
Website: https://www.supermicro.com/
|