|
![](/nbswebapp/YES.png) | NS5482M5
Network Server
Inspur Corporation | 01 Aug 2019
148530 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 |
Product Description
For more information, please visit www.inspur.com
Tested Configuration:
Computer Type: | Rack Mount |
Mother Board Revision: | v1.0 |
BIOS/uEFI: | UEFI: 4.1.05 (2019/05/14) |
CPU: | 2 Intel
Xeon® Platinum 8256 Processor 3.80 GHz |
RAM: | 32 GB |
Ports and Bus Types: | PCI Express X8 3 USB Ports 2 PCI Express X16 |
Video Adapter: | ASPEED
AST2500 |
Host Bus Adapter: | LSI Logic
MegaRAID SAS-3 3108
, Serial SCSI (SAS) |
Hard Disk Drive: | Seagate®
ST9900805SS 900GB 6Gbp/s SAS
, Serial SCSI (SAS) |
Test Kit: | System Certification Kit 8.2.0-15.5 |
Config Notes
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration.
- Kdump (SLE15): the crash kernel reserved memory parameters were increased from the default to crashkernel=256M,high crashkernel=128M,low using YaST.
|
Referenced Bulletins
148202
Adapters and Drivers
| | | | | |
ASPEED
AST2500 |
| Driver Type: Video Driver | Driver Name: ast.ko |
| Driver Date: 31-May-2018 | Driver Size: 130632 |
| Checksum: 2b1d7c8b92a90ff3b3c5fce07dcc9ffe |
|
2 Intel
Ethernet Server Adapter I210-T1 |
| Driver Type: LAN Driver | Driver Name: igb.ko |
| Driver Date: 31-May-2018 | Driver Size: 489024 |
| Checksum: d5232654a1debc91e634dcdcdf5d1fc8 |
| Driver Version: 5.4.0-k |
|
LSI Logic
MegaRAID SAS-3 3108 |
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| Driver Date: 31-May-2018 | Driver Size: 288872 |
| Checksum: 05a11c19ea5020998382f29c3ae31971 |
| Driver Version: 07.704.04.00-rc1 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Inspur Corporation
Building C. NO.2
Xinxi Road
Shangdi, Haidian District
Beijing
100080
CHINA
|