|
| UCSB-B200-M6
Network Server
Cisco Systems, Inc. | 23 Jun 2021
150410 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 Service Pack 3 for SUSE® SLES 15 |
Product Description
UCS B200 M6
Tested Configuration:
Computer Type: | Blade Module |
Mother Board Revision: | 73-20489-01 |
BIOS/uEFI: | UEFI: B200M6.4.2.0.408.0427210434 (04/27/2021) |
CPU: | 2 Intel
Xeon® Gold 5220 Processor 2.20 GHz |
RAM: | 192 GB |
Ports and Bus Types: | PCI Express X16 PCI Express X4 |
Video Adapter: | Matrox Graphics Inc.
G200 SE A (PCI) |
Host Bus Adapter: | Western Digital
SN720 NVMe Controller
, Serial ATA (SATA) |
Hard Disk Drive: | Western Digital
SN720 NVMe SSD 500GB
, Serial ATA (SATA) |
Test Kit: | System Certification Kit 8.6.0-33.1 |
Config Notes
- Headless configuration - no graphics adapter. System configured using IBM remote Hardware Management Console (HMC) for graphics, keyboard and mouse.
- Install: The SUSE® Linux Enterprise Server install was performed using a network install method.
- Power management: The System/Processor dynamic CPU frequency scaling functionality in SLES is not supported on POWER8 as this functionality is provided by the POWER8 hardware its-self.
- Required configuration: SLES 11 SP4 is run in POWER7 Compatibility mode. 'Compatibility mode' simply means that the POWER8 processor with SMT8 will act as though it were a POWER7 processor with SMT4.
- Kdump: the crash kernel reserved memory parameters were changed based on the content in the following knowledge-base article: http://www.novell.com/support/kb/doc.php?id=3374462.
|
Adapters and Drivers
| | | | | |
Matrox Graphics Inc.
G200 SE A (PCI) |
| Driver Type: Video Driver | Driver Name: swrast_dri.so |
| Driver Date: 20-Feb-2021 | Driver Size: 21788696 |
| Checksum: 38c4a31963eaa9f3b48ec115742967a5 |
|
Cisco
UCS VIC 1440 |
| Driver Type: LAN Driver | Driver Name: enic.ko.xz |
| Driver Date: 06-May-2021 | Driver Size: 39700 |
|
| Driver Version: 0xa2 |
|
Western Digital
SN720 NVMe Controller |
| Driver Type: HBA Driver | Driver Name: nvme.ko.xz |
| Driver Date: 06-May-2021 | Driver Size: 20776 |
| Checksum: ae33c236289b1fb8c53320deb10c9ec0 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Cisco Systems, Inc.
170 West Tasman Dr.
San Jose
, CA
95134
Voice: (408) 526-4000
Toll Free: (800) 553-NETS or (800) 553-6387
Website: http://www.cisco.com/c/en/us/support/servers-unified-computing/unified-computing-system/products-technical-reference-list.html
|