|
 | Compute Node - x480 X6 (Flex) - Type 7196 / E7-8800 v3
Network Server
IBM | 24 Sep 2021
150871 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 with KVM Service Pack 2 for SUSE® SLES 11 |
Virtual Machines (Guests OS):
SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 |
|
SP:
Service Pack 3 for SUSE SLES 15 |
Arch:
64 |
Mode:
Paravirtualized |
SUSE® Linux Enterprise Server 12 for AMD64 & Intel64 |
|
SP:
Service Pack 5 for SUSE SLES 12 |
Arch:
64 |
Mode:
Paravirtualized |
Windows Server 2019 |
|
Arch:
64 |
Mode:
Fully Virtualized |
SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 |
|
Arch:
64 |
Mode:
Fully Virtualized |
SP:
Service Pack 3 for SUSE® SLES 15 |
SUSE® Linux Enterprise Server 12 for AMD64 & Intel64 |
|
Arch:
64 |
Mode:
Fully Virtualized |
SP:
Service Pack 5 for SUSE® Linux Enterprise 12 |
Product Description
For more information about this system, please visit www.lenovo.com.
Tested Configuration:
Computer Type: | Super Server |
Mother Board Revision: | PASS 3 |
BIOS/uEFI: | UEFI: N3E156AUS - v4.80 (10/20/2020) |
CPU: | 4 Intel
Xeon® Processor E7-8890 v3 2.50 GHz |
RAM: | Host: 384 GB, multiple VMs: 64 GB each, single max VM: 330 GB |
Ports and Bus Types: | 2 USB Ports 4 PCI Express X16 8 PCI Express X8 |
Video Adapter: | Matrox®
MGA G200eR2 |
Host Bus Adapter: | 2 IBM
ServeRAID M1210e SAS/SATA Controller
, Serial ATA (SATA) |
Hard Disk Drive: | 2 IBM
500GB 7.2K 6Gbps SATA 2.5-inch SFF HDD
, Serial ATA (SATA) |
Test Kit: | System Certification Kit 8.6.1-38.2 |
Config Notes
- SUSE Driver Kit: The ibm_x6-sle11sp3-x86_64 driver kit is SUSE SolidDriver Program compliant. The driver kit was installed during the SLES install process as an initial bootable iso image. This driver must be downloaded and installed before the SLES install. To obtain the driver go to: http://drivers.suse.com/ibm/IBM-X6/sle11-sp3/install-readme.html.
- Install: System installed using an internal DVD drive; the OS was installed from DVD using the UEFI boot loader and elilo system configuration.
- Kdump: the crash kernel reserved memory parameter in the elilo.conf file was changed from 128 to 256 (crashkernel=512M-:256M) for kdump to function correctly.
- Hard disk configuration: RAID 0, RAID 1 and RAID 5.
|
Referenced Bulletins
141510
Adapters and Drivers
| | | | | |
Matrox®
MGA G200eR2 |
| Driver Type: Video Driver | Driver Name: mgag200.ko.xz |
| Driver Date: 06-May-2021 | Driver Size: 12560 |
| Checksum: 307ec2e0d10ef89edb1a546922121620 |
|
2 Lenovo
Embedded Four-Port 10GB Virtual Fabric Ethernet LOM |
| Driver Type: LAN Driver | Driver Name: be2net.ko.xz |
| Driver Date: 06-May-2021 | Driver Size: 62820 |
| Checksum: eba908c8b5c4d585024b614367ca1a7f |
| Driver Version: 12.0.0.0 |
|
2 IBM
ServeRAID M1210e SAS/SATA Controller |
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko.xz |
| Driver Date: 06-May-2021 | Driver Size: 68420 |
| Checksum: cdc7bfa63964ba2caa52b643881b6a11 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|