|
 | ProLiant ML350 Gen11(Xeon 8490H, 1.9GHz, 60c)
Network Server
IBM | 02 May 2023
152071 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 Service Pack 3 for SUSE® SLES 11 |
Product Description
For more information please visit, https://www.hpe.com/us/en.servers.html
Tested Configuration:
Computer Type: | Tower |
Mother Board Revision: | Gen11 |
BIOS/uEFI: | UEFI: 1.30 (03/01/2023) |
CPU: | 2 Intel
Xeon® Processor E5620 2.40 GHz |
RAM: | 512 GB |
Ports and Bus Types: | 5 USB Ports 3 PCI Express X16 |
Video Adapter: | Matrox®
MGA G200 VE |
Host Bus Adapter: | Intel
Integrated 82801JI ICH10
, Serial ATA (SATA) IBM
ServeRAID-MR10i
, Serial SCSI (SAS) |
Hard Disk Drive: | 2 IBM
1 TB 7200 RPM 3.5inch Hot-Swap HDD
, Serial ATA (SATA) 2 IBM
73.4GB 15K 3.5 SAS Hot-swap HDD
, Serial SCSI (SAS) |
CD/DVD: | TSST
TS-H353B DVD-ROM
, Serial ATA (SATA) |
Test Kit: | System Certification Kit 8.7.1-52.1 |
Config Notes
- Install: System installed using an external USB DVD drive; the OS was installed from DVD using the UEFI boot loader and elilo system configuration.
- SUSE SolidDriver Compliant: The be2net network driver used during testing was installed from the following driver update disk (DUD): elx-be2net_10.0.727.54-be2iscsi_10.0.727.62-lpfc_10.0.727.20-sles11sp3-1.iso. This DUD should be downloaded and installed during the SLES install. To obtain the driver go to: http://drivers.suse.com/driver-process/pub/update/Emulex/sle11sp3/common/DUD/dud_lpfc_10.0.727.20_be2net_10.0.727.54_be2iscsi_10.0.727.62/ .
- Kdump: Crash kernel dump and capture does not function properly on this system due to the Emulex network adapter, and is therefore not supported.
|
Referenced Bulletins
141246
Adapters and Drivers
| | | | | |
Matrox®
MGA G200 VE |
| Driver Type: Video Driver | Driver Name: mga_drv.so |
| Driver Date: 13-May-2013 | Driver Size: 204964 |
| Checksum: 12efb07097320f259e3570652cf129da |
| Driver Version: 1.4.11 |
|
Broadcom®
Integrated BCM5709C Dual-Port 10/100/1000BASE-T TOE PCI Express® Ethernet Controller |
| Driver Type: LAN Driver | Driver Name: bnx2.ko |
| Driver Date: 14-Jun-2013 | Driver Size: 101143 |
| Checksum: bdde6cd0fa02a043d168aa0e1d449d72 |
| Driver Version: 2.2.3 |
|
Intel
Integrated 82801JI ICH10 |
| Driver Type: HBA Driver | Driver Name: ata_generic.ko |
| Driver Date: 14-Jun-2013 | Driver Size: 10087 |
| Checksum: b62b0cf2a55cf0bee144beb44c376953 |
| Driver Version: 0.2.15 |
|
IBM
ServeRAID-MR10i |
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| Driver Date: 14-Jun-2013 | Driver Size: 94071 |
| Checksum: ebe0dac982da7dda6e42ffdc95e7da0c |
| Driver Version: 06.506.00.00-rc1 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|