|
![](/nbswebapp/YES.png) | H3C UniServer R5500 G6
Network Server
Positivo Tecnologia S.A. | 11 Sep 2023
152679 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Desktop 12 for AMD64 & Intel64 Service Pack 3 for SUSE® SLED 12 |
Product Description
H3C UniServer R5500 G6
Tested Configuration:
Computer Type: | Rack Mount |
Mother Board Revision: | 0231A111 |
BIOS/uEFI: | UEFI: 6.00.25 (07/21/2023) |
CPU: | 2 Intel
Xeon® Platinum 8490H Processor 1.90 GHz |
RAM: | 384 GB |
Video Adapter: | ASPEED
AST2600 |
Host Bus Adapter: | Broadcom®
MegaRAID 9560-16i
, Serial SCSI (SAS) |
Hard Disk Drive: | Samsung®
PM897, 480GB, SATA (MZ7L3480HBLT-00B7C)
, Serial ATA (SATA) |
Test Kit: | System Certification Kit 8.8.0-150400.80.1 |
Config Notes
- The SLES 11 was installed from a PXE server. Steps to install the "Sun Dual 10GbE SFP+ PCIe Express Module" 1a) set allow_unsupported_modules to "1" in /etc/modprobe.d/unsupported-modules 1b) Install ixgbe-2.0.44.14-1.sles11.x86_64.rpm. 1c) adding nox2apic in boot command line. 1d) add the following into /etc/modprobes.conf.local options ixgbe InterruptType:1,1,1,1,1,1,1,1
- Install: PXE Boot, OS Installed via Network.
- The ixgbe driver used during certification testing is
included on the SUN Tools CD. This ixgbe driver is not
PLDP compliant and is NOT supported by Novell.
|
Adapters and Drivers
| | | | | |
ASPEED
AST2600 |
| Driver Type: Video Driver | Driver Name: ast.ko.zst |
| Driver Date: 11-May-2022 | Driver Size: 31130 |
| Checksum: 734c0cf8a6d7d153f61372e89322ca39 |
|
New H3C Technologies Co., Ltd.
Ethernet Adapter 360T-B (quad-port) |
| Driver Type: LAN Driver | Driver Name: igb.ko.zst |
| Driver Date: 11-May-2022 | Driver Size: 133614 |
| Checksum: a02abff3db3974186b0bfb2a68639857 |
|
Broadcom®
MegaRAID 9560-16i |
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko.zst |
| Driver Date: 11-May-2022 | Driver Size: 91281 |
| Checksum: 73fe8023764e189c76be50188530b557 |
| Driver Version: 07.719.03.00-rc1 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Positivo Tecnologia S.A.
Rua Javari, 1255 Distrito Industrial
Manaus
, AM
CEP 69075-110
BRAZIL
|