|
| UCSX-210C-M7
Network Server
Cisco Systems, Inc. | 26 Jun 2024
153337 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 15 for AMD64 & Intel64
Service Pack 6 for SUSE® SLES 15 |
Product Description
Cisco Blade server
Tested Configuration:
Computer Type: | Blade Module |
Mother Board Revision: | 73-102386-06 |
BIOS/uEFI: | UEFI: X210M7.4.3.4a.0.0513242027 (05/13/2024) |
CPU: | 2 Intel
Xeon® Platinum 8592+ Processor 1.90 GHz |
RAM: | 1 TB |
Video Adapter: | ASPEED
AST1300 |
Host Bus Adapter: | Micron Technology, Inc.
9100 SSD Non-Volatile Memory Controller |
Hard Disk Drive: | Cisco
UCS-NVME6-W1600 1.6TB WD SN840 |
Test Kit: | System Certification Kit 9.0.0-150500.99.1 |
Config Notes
- Graphics: Video driver used in testing was downloaded from http://www.hp.com/support/workstations. Video driver is not SolidDriver-compliant and requires installation of kernel source and development tools.
- Kdump: The crash kernel reserved memory parameters were increased from the default to crashkernel=128M,high crashkernel=128M,low .
- Power management: System/Processor does NOT support fan thermal scaling.
- Audio: SLED 11 SP4 kernel update 3.0.101-71 from official SUSE update channel was installed to enable internal audio.
|
Adapters and Drivers
| | | | | |
ASPEED
AST1300 |
| Driver Type: Video Driver | Driver Name: ast.ko.zst |
| Driver Date: 19-May-2024 | Driver Size: 44985 |
| Checksum: 5eee30b9122c2e3a506f977d481f770f |
|
Cisco
UCS VIC 1440 |
| Driver Type: LAN Driver | Driver Name: enic.ko.zst |
| Driver Date: 19-May-2024 | Driver Size: 73618 |
| Checksum: dbe2fb9247bee4a6505da204d464b547 |
|
Micron Technology, Inc.
9100 SSD Non-Volatile Memory Controller |
| Driver Type: HBA Driver | Driver Name: nvme.ko.zst |
| Driver Date: 18-May-2024 | Driver Size: 43730 |
| Checksum: 898b51a6c78084111582180424313417 |
| Driver Version: 1.0 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Cisco Systems, Inc.
170 West Tasman Dr.
San Jose
, CA
95134
Voice: (408) 526-4000
Toll Free: (800) 553-NETS or (800) 553-6387
Website: http://www.cisco.com/c/en/us/support/servers-unified-computing/unified-computing-system/products-technical-reference-list.html
|