SUSE YES Certified for the following products: Product Description IBM 3-Node Netware 5.1 Cluster with IBMSAN Multi-path Fail-over Fibre Channel Solution. IBM FAStT200 HA Storage Server (3542-2RU, Code Level 8.21). IBM eServer x235, x360, and x342/x232 Servers. Tested with the following Products: IBMSAN Multi-path Failover Solution v1.06c Netware v5.1 Netware v5.1, Service Pack 4 Novell Cluster Services v1.01 with NCS Update Product Description: This solution uses the IBM Fibre Channel FAStT200 HA Storage Server with Redundant Controller (3542-2RU), IBM Total Storage FAStT FC-2 Host Bus Adapters (P/N 19K1246), and IBM eServer x235, x360, and x342/x232 Servers . The IBM Multi-path Fail-over driver IBMSAN.CDM is also tested. Each server is configured with 2 FAStT FC-2 Host Bus Adapters and cabled to 2 QLogic Fibre Channel SAN Switches which provide redundant fail-over pathways to the Fibre Channel Controllers. Test Configuration: Fibre Channel Subsystem Hardware 1 3542-2RU IBM FAStT200 HA Storage Server with Redundant Controllers w/IBM 18.2 GB Fibre Channel Hard Drives (P/N 19K1472) 2 QLogic SANbox2 Model SB2A-08B2 Fibre Channel Switches 2 IBM FAStT FC-2 Host Bus Adapters per system BIOS v1.25 (P/N 19K1246) Fibre Channel Subsystem Software IBM FAStT200 HA Storage Server Firmware v05.20.08.01 IBM FAStT200 HA Storage Server NVSRAM vCNV3542R821NT018 IBM FAStT Storage Manager 8.0 v08.00.G5.00 Server Systems: 1 IBM eServer x342/x232 Type 8669/8668 (BIOS v23A rev1.04) Pentium III 1GHz/256KB 1 IBM eServer x235 Type 8671 (BIOS v1.02) Pentium III 2.4GHz/512MB 1 IBM eServer x360 Type 8686 (BIOS v41A rev1.02) Pentium III 1.6GHz/256KB/1024KB Tested Configuration:
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide. https://www.suse.com/product-certification/yes-certified/certification-requirements/ For more information regarding the specific test configuration, please contact: IBM For support regarding this specific configuration, please visit: www-03.ibm.com/systems/z/solutions/virtualization/kvm |
80946